<div dir="ltr"><div dir="ltr">Hi all,<div><br></div><div>I am working on the project where the project space is served by chilled water to meet the building heat load. And in eQuest, I have considered the single zone Reheat system  under the Air Side HVAC tab for AHU having 14200 CFM working 9 hours 6 days a week.</div><div><br></div><div>My doubt is that whether I set the fan controls constant speed or variable speed, the software generated fan energy consumption KWh are nearly the same (only a  difference of 16 KWh) between both the cases.</div><div><br></div><div>This seems that I will not get the benefit of variable speed fan control in case there is a VFD equipped to AHU.</div><div><br></div><div>Can anyone help me why there is a very little difference in fan energy consumption using constant speed and variable speed fan in the model. </div><div><br></div><div><br></div></div></div>