<div><div dir="auto" style="font-size:1rem;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">Dear Nitin,</div><div dir="auto" style="font-size:16px;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)"><br></div><div dir="auto" style="font-size:1rem;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">You can change the system type like VAV system and it will give you savings of VFD speed. In eQuest single zone reheat with vfd option is allow to take vfd speed savings.</div><div dir="auto" style="font-size:16px;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)"><br></div><div dir="auto" style="font-size:1rem;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">Thanks</div><div dir="auto" style="font-size:1rem;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">Anil</div><div dir="auto" style="font-size:1rem;word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">——-</div></div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, 18 Oct 2020 at 9:52 PM, Nitin Harjai via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,204,204)"><div dir="ltr"><div dir="ltr">Hi all,<div><br></div><div>I am working on the project where the project space is served by chilled water to meet the building heat load. And in eQuest, I have considered the single zone Reheat system  under the Air Side HVAC tab for AHU having 14200 CFM working 9 hours 6 days a week.</div><div><br></div><div>My doubt is that whether I set the fan controls constant speed or variable speed, the software generated fan energy consumption KWh are nearly the same (only a  difference of 16 KWh) between both the cases.</div><div><br></div><div>This seems that I will not get the benefit of variable speed fan control in case there is a VFD equipped to AHU.</div><div><br></div><div>Can anyone help me why there is a very little difference in fan energy consumption using constant speed and variable speed fan in the model. </div><div><br></div><div><br></div></div></div><br><br>_______________________________________________<br><br>Equest-users mailing list<br><br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br><br>To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br><br></blockquote></div></div>