<!DOCTYPE html><html><head><title></title><style type="text/css">
p.MsoNormal,p.MsoNoSpacing{margin:0}
p.MsoNormal,p.MsoNoSpacing{margin:0}</style></head><body><div>The group has been very helpful today regarding the baseboard heating issue I had. I have a few more basic questions I've been itching to ask:<br></div><div><br></div><div>(1) If I place a new shell directly above an existing shell, how to I tell eQuest that the existing shell's roof is no longer exposed to the outdoors? I'm wondering how to do this in both Wizard mode and Detailed mode. (A work-around I've come up with is to set the existing shell's roof to an impossibly high R value.)<br></div><div><br></div><div><span style="color:rgb(75, 75, 75);font-style:normal;font-variant-ligatures:normal;font-variant-caps:normal;font-weight:400;letter-spacing:normal;orphans:2;text-align:start;text-indent:0px;text-transform:none;white-space:normal;widows:2;word-spacing:0px;-webkit-text-stroke-width:0px;background-color:rgb(255, 255, 255);text-decoration-style:initial;text-decoration-color:initial;float:none;display:inline !important;"><span class="font" style="font-family:Arial;"><span class="size" style="font-size:14px;">(2) I have two shells in eQuest, separated by an unknown distance. I'd like to measure the distance between the shells so I can position them as needed. Is there a way to measure this? I would then go into the shell and adjust its position on Screen 1 in the Wizard ("Specify Exact Site Coordinates"). (Or I could adjust in Detailed mode, although I haven't adjusted shell position in Detailed mode up to this point.)</span></span></span><br></div><div><br></div><div>(3) In Detailed Design wizard mode, how do I add exhaust fans (or can exhaust fans only be added in detailed mode)? I only see an option for supply fans. I know how to add them in Detailed mode, but not Wizard mode.<br></div><div><br></div><div>Thanks again,<br></div><div><br></div><div>Matthew</div></body></html>