<div dir="ltr"><div dir="ltr"><div dir="ltr"><h1><font size="2" color="#073763" style="font-weight:normal">Hi Phil,</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">The way that I am thinking about is the option to get the result on the
basis of eQuest software back calculations.</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">The calculation on which DHW outputs are based is the formulae Q= 500X GPM X delta T.</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">Now to get the GPM or the actual flow one will have to deter the Q or the
total heat across the DHW in Btuh. From the heat delta T across the DHW one
will come to know the delta T across the DHW in degree Fahrenheit.</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">Now from the basic formula Q= 500 XGPM X delta T knowing the two factors
GPM and delta T one can easily determine GPM across the DWH.<br>
As per my experience the energy simulation software are based on these easy
back calculations of which one is above here.</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">From this Gallon per minute (GPM) or the flow is got ahead.</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">Thanks and Regards,</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">Sharad.Kumar</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">Freelancer</font></h1>
<h1><font size="2" color="#073763" style="font-weight:normal">India</font></h1>
<br><br><br>---------- Forwarded message ----------<br>From: Phil Jordan <<a href="mailto:phil.jordan@clearesult.com" target="_blank">phil.jordan@clearesult.com</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Bcc: <br>Date: Wed, 15 Jul 2020 20:43:51 +0000<br>Subject: [Equest-users] SIM report for annual water consumption?<br>
<div lang="EN-US">
<div class="gmail-m_2001091303271407809WordSection1">
<p class="MsoNormal">Does eQUEST output annual water consumption in the SIM report (for DHW)? Or do you have to set up an hourly report to sum the DHW loop “Fluid flow, supply side” variable?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thanks,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b><span style="font-size:10.5pt;font-family:Arial,sans-serif;color:rgb(0,94,104)">Phil Jordan</span></b><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>
<br><br><br>---------- Forwarded message ----------<br>From: Phil Jordan <<a href="mailto:phil.jordan@clearesult.com" target="_blank">phil.jordan@clearesult.com</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Bcc: <br>Date: Thu, 16 Jul 2020 01:39:55 +0000<br>Subject: Re: [Equest-users] SIM report for annual water consumption?<br>
<div lang="EN-US">
<div class="gmail-m_2001091303271407809WordSection1">
<p class="MsoNormal">I think the way to do this is to set up an hourly report for both the “Fluid flow, supply side” and “Fluid flow, return side” for the DHW loop – the difference between the two should be the flow that’s going down the drain at each hour;
the sum of this would be the annual DHW water consumption.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">But if anyone knows of an easier way to get this from the SIM report please share.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thanks,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal"><b><span style="font-size:10.5pt;font-family:Arial,sans-serif;color:rgb(0,94,104)">Phil Jordan</span></b><u></u><u></u></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(225,225,225);padding:3pt 0in 0in">
<p class="MsoNormal"><b>From:</b> Equest-users <<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>>
<b>On Behalf Of </b>Phil Jordan via Equest-users<br>
<b>Sent:</b> Wednesday, July 15, 2020 1:44 PM<br>
<b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> [Equest-users] SIM report for annual water consumption?<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><strong><span style="font-family:Calibri,sans-serif;color:maroon">EXTERNAL email. Please exercise caution. This e-mail is from a sender outside of CLEAResult. Do not click any links or open any attachments from unknown senders or unexpected
email. </span></strong><span style="color:maroon">***************************************************</span>
<u></u><u></u></p>
<div>
<p class="MsoNormal">Does eQUEST output annual water consumption in the SIM report (for DHW)? Or do you have to set up an hourly report to sum the DHW loop “Fluid flow, supply side” variable?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thanks,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b><span style="font-size:10.5pt;font-family:Arial,sans-serif;color:rgb(0,94,104)">Phil Jordan</span></b><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>
</div>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="mailto:Equest-users@lists.onebuilding.org" target="_blank">Equest-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a></div></div></div>