<div dir="ltr"><div dir="ltr"><div><font color="#073763">Hi Konstantina,</font></div><div><font color="#073763"><br></font></div><div><font color="#073763"><br></font></div><div><span style="color:rgb(7,55,99)">I would like to suggest the theory behind the scene.</span><br></div><div><font color="#073763">The sensible load comes in eQUEST by the following super-headed things:</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">1. Occupancy</font></div><div><font color="#073763">2. Space lighting</font></div><div><font color="#073763">3. Equipment loads</font></div><div><font color="#073763">4. Outside area space heat gain.</font></div><div><font color="#073763">5. Infiltration</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">Latent heat in my sense comes from:</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">1. Occupancy</font></div><div><font color="#073763">2. Infiltration.</font></div><div><font color="#073763"><br></font></div><div><span style="color:rgb(7,55,99)">Now the sensible heat gain is the real temperature value to be going high.</span><br></div><div><font color="#073763">Now the 5 cases are like the occupancy heat gain from the person is the real cause for the sensible load to be parting up in the temperature going up.</font></div><div><font color="#073763">Space lighting and equipment load has some part as the fraction of input LPD , EPD part to behave as the sensible load which is drawn from the real input with sensible heat gain fraction to the space.</font></div><div><font color="#073763">Outside area gain and the infiltration gets involved with the outside heat to get transferred in the space and make the temperature higher.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763"><br></font></div><div><font color="#073763">Latent heat is the heat from occupants and the outside heat infiltrated air to come inside the room with moisture to let the wet bulb temperature to be going higher,</font></div><div><font color="#073763">The heated moisture is the cause to behave the wet bulb temperature to go higher as the WBT is dependent upon the moisture temperature of the room.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">Now as per your query if the sensible heat load is greater than 0 than the inside air will have higher temperature to get cooled and hence there will be sense of cooling load.</font></div><div><font color="#073763">If the sensible load is smaller than 0 than there is requirement of heating.</font></div><div><font color="#073763">Others input might also help.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763"><br></font></div><div><span style="color:rgb(7,55,99)"><b>Thanks and Regards,</b></span><br></div><div><font color="#073763">Sharad.Kumar</font></div><div><font color="#073763">Freelancer</font></div><div><font color="#073763"><br></font></div><div dir="ltr"><span style="color:rgb(7,55,99)">....................................................................................................................................................</span><br></div><div dir="ltr"><br></div><div dir="ltr">---------- Forwarded message ----------<br>From: Konstantina Kalliakoudi <<a href="mailto:kalliakoudi.k@gmail.com" target="_blank">kalliakoudi.k@gmail.com</a>><br>To: <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>Cc: <br>Bcc: <br>Date: Wed, 20 May 2020 12:22:59 +0300<br>Subject: [Equest-users] Heating and Cooling Loads per Hours for a thermal zone<br><div dir="ltr"><div>Hello to all equest users,</div><div><br></div><div>I am searching the Loads (Total Losses and Gains) of a thermal zone per hour.</div><div>I did following step (see screenshot)</div><div><div><img src="cid:ii_kaf4x7df0" alt="image.png" width="492" height="366"><br></div><div>If the Sensible Load is >0 then It is a cooling load,</div><div>if it is <0 it is a heating load.</div><div><br></div><div>For all the building I can see all the information per hour  concerning loads for the thermal zone I can't find more information.</div><div><br></div><div>Do you have a suggestion or comment?</div><div><br></div><div>Thank you very much.</div><div>I appreciate all the help I get from this forum</div><div><br></div><div>Best Regards</div><div>Konstantina Kalliakoudi</div><div>Mechanical Engineer M.sc<br></div></div></div>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="mailto:Equest-users@lists.onebuilding.org" target="_blank">Equest-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a></div></div></div>