<div dir="ltr">I am trying to model a building that uses single zone systems with variable speed setbacks and chilled water cooling. I was under the impression that the best way to model this would be to use the single zone reheat system type and then lower the minimum flow ratio. When I look at the hourly reports, eQuest is only reducing the airflow below the maximum when there is a heating load in on the system. When the space is in cooling, or when there is no call for heating or cooling, it is running at the maximum airflow. Is there a way to get around this? What system type is best to model a single one VAV with chilled water cooling? <div><br></div><div>Thanks,</div><div>Steve</div></div>