<div dir="ltr"><div dir="ltr"><div><font color="#073763">Hi Inga,</font></div><div><font color="#073763"><br></font></div><div><span style="color:rgb(7,55,99)">As per my understanding the correction that i can suggest is the correction in schedules.</span><br></div><div><font color="#073763">The electrical consumption that you are inferring in the eQUEST as 330 MWh and the actual bills are 73 MWh.</font></div><div><font color="#073763">Now you are as a suggestion is required to fetch the actual working hour of the type wise hourly use of the segments.</font></div><div><font color="#073763">There can be minor or major mismatch in the hourly usage which sometime can have slight or above mismatch.</font></div><div><font color="#073763">Kindly get the hourly usage data from the electrical consultant and if seen do the correction in  the schedules.</font></div><div><font color="#073763">This is the only correction that i am able to think right now.</font></div><div><font color="#073763">Hope this might help.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763"><br></font></div><div><b><font color="#073763">Thank sand Regards,</font></b></div><div><font color="#073763">Sharad.Kumar</font></div><div><font color="#073763">Freelancer</font></div><div><font color="#073763">India..</font></div><div><font color="#073763"><br></font></div><div dir="ltr"><font color="#073763">-----------------------------------------------------------------------------------------------------------------------------</font></div><div dir="ltr"><br></div><div dir="ltr">   1. Electricity consumption mismatch between model and bill<br></div><div dir="ltr">
      (Inga Goebel)<br>
<br><br><br>---------- Forwarded message ----------<br>From: Inga Goebel <<a href="mailto:igoebel@duluthmn.gov" target="_blank">igoebel@duluthmn.gov</a>><br>To: "'<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>'" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Bcc: <br>Date: Fri, 25 Oct 2019 19:52:53 +0000<br>Subject: [Equest-users] Electricity consumption mismatch between model and bill<br>





<div lang="EN-US">
<div class="gmail-m_-81259431496381532WordSection1">
<p class="MsoNormal">Hello,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I am currently struggling with a problem concerning the electricity consumption of the building I modeled in eQuest. eQuest predicts a way higher electricity consumption than it actually was billed for by the power provider. eQuest predicts
 a usage of about 330 MWh a year and the actual bills were at 73MWh for a year. Being sure that the power provider doesn’t give away free electricity, I am currently trying to figure out where I made a mistake.
<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">One possible problem could be, that I included all the mechanicals (like pumps, AHU, fan, unit heater, boiler,…) in the plug loads (misc. equipment), which I read later, I should not do. But I am also not able to find where I can correct
 it without going back to the wizard and losing all my changes made in detailed mode.  Now it is only shown as equipment load which (if I understand correctly) includes my plug loads and also the electricity consumption calculated by eQuest of the HVAC system.
 So is the consumption of the HVAC system accounted for twice? Since I only want to redo my plug loads, how can I do that without interfering with the eQuest calculation of the HVAC electricity usage? Any help with that?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Also, these loads should not be a majority of the building and the overall consumption will still be too high (at least that’s my guess). Anyone ever had the same problem?  <u></u><u></u></p>
<p class="MsoNormal">Lights consumption is about correct. <u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thank you for your help.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Inga Goebel<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>

_______________________________________________<br>
Equest-users mailing list<br>
<a href="mailto:Equest-users@lists.onebuilding.org" target="_blank">Equest-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a></div></div></div>