<div dir="ltr"><div>Dear All,</div><div><br></div>I have a model located in Mexico. The baseline is equipped with PSZ+Heat pump and proposed is equipped with VFD + Heat pump. For some reasons, the baseline has a normal space heat, but the proposed shows 0 space heat. The envelop, schedule, setpoints, outside air flow rates are all the same. <div>1. What could be the possible reason for something like this?<div>2. Does anyone know how eQuest calculate the heating/cooling capacity at the system and zone level? For example, I set up the cooling and heating capacity for the system and set up setpoints for each zone. So in the SV-A, it only shows the heating/cooling capacity of the system, and for each zone will be zero heating and cooling capacity?</div><div>3. What is the extraction rate (KBTU/HR) and addition rate(KBTU/HR) in SV-A? Where are they from?</div><div><div><br></div><div><div><img src="cid:ii_joewjay30" alt="image.png" width="542" height="192"><br></div></div><div><br></div><div><div><img src="cid:ii_joewjym21" alt="image.png" width="542" height="194"><br></div></div><div><br></div><div>Thank you!</div></div></div></div>