<div><div dir="auto">Dear John,</div></div><div dir="auto">Hi, Thank you very much for your extensive reply. I’m sure it will be a great help and I will try it.</div><div dir="auto"><br></div><div dir="auto">Regards,</div><div dir="auto"><br></div><div dir="auto">Ali</div><div><br><div class="gmail_quote"><div dir="ltr">On Fri, Nov 9, 2018 at 10:11 PM John Aulbach <<a href="mailto:jra_sac@yahoo.com">jra_sac@yahoo.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="m_-2480324860683427736ydp43ff5afdyahoo-style-wrap" style="font-family:verdana,helvetica,sans-serif;font-size:16px"><div></div>
<div>I am going to give this a heck of a try.</div><div><br></div><div>See the explanation below for Baseboard-SCH. This is used when <span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px">BASEBOARD-CTRL = OUTDOOR-RESET. Read how to set it up. If you want some non-control, have baseboards fully active at, say 50 DegF. They will respond to outdoor air rather than space conditions. For your space controlled baseboard (THERMOSTATIC), have full baseboards on at 0 DegF.</span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px"><br></span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px">You might play with this a bit to see how much difference there is between the scenarios.</span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px"><br></span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px">I find it difficult to comprehend in this day and age baseboards that just RUN. You COULD just put a constant baseboard load into either an external electric or gas load for that.</span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px"><br></span></span></div><div><span><span style="color:rgb(0,0,0);font-family:verdana,helvetica,sans-serif;font-size:16px">John Aulbach, PE</span></span></div><div><br></div><div><span><h5>BASEBOARD-SCH</h5>
<p class="m_-2480324860683427736ydp437c9498MsoBodyText">Takes the U-name of a SCHEDULE (TYPE=RESET-RATIO) that
defines the relationship between baseboard heat output and outside air
temperature, and specifies the days of the year during which this relationship
applies. This keyword applies only if BASEBOARD-CTRL = OUTDOOR-RESET. If
BASEBOARD-CTRL = THERMOSTATIC, the program will use HEAT-TEMP-SCH to control the
baseboards. Note that the DAY-SCHEDULE-PD keywords SUPPLY-HI and SUPPLY-LO,
which usually specify temperatures, are used here to specify baseboard output as
a fraction of BASEBOARD-RATING. </p>
<p class="m_-2480324860683427736ydp437c9498MsoBodyText">You must be careful to avoid shutdown of system heating
capability (see HEATING-SCHEDULE) during periods when baseboard heating is
desired. </p>
<p class="m_-2480324860683427736ydp437c9498Exampleinput">Example input:</p>
<p class="m_-2480324860683427736ydp437c9498DOE-2Input">BASE-DAY-1 = DAY-SCHEDULE-PD<br>TYPE =
RESET-RATIO<br>SUPPLY-HI = 1.0<br>SUPPLY-LO =
0.0<br>OUTSIDE-HI = 70.0<br>OUTSIDE-LO = 0.0 ..</p>
<p class="m_-2480324860683427736ydp437c9498DOE-2Input">BASE-SCHED-1 = SCHEDULE (or
SCHEDULE-PD)<br>TYPE = RESET-RATIO<br>THRU DEC 31 (ALL)
BASE-DAY-1 ..</p>
<p class="m_-2480324860683427736ydp437c9498DOE-2Input">SYS-1 = SYSTEM<br>BASEBOARD-SCH= BASE-SCHED-1<br>....</p>
<p class="m_-2480324860683427736ydp437c9498MsoBodyText">In this example, baseboard heat is fully on for outside
temperature below 0F and decreases linearly to zero when the outside temperature
reaches 70F.</p></span><br></div><div><br></div>
</div><div id="m_-2480324860683427736yahoo_quoted_1947016758" class="m_-2480324860683427736yahoo_quoted">
<div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px;color:#26282a"></div></div></div><div><div id="m_-2480324860683427736yahoo_quoted_1947016758" class="m_-2480324860683427736yahoo_quoted"><div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px;color:#26282a">
<div>
On Thursday, November 8, 2018, 4:24:00 PM PST, Ali via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>> wrote:
</div>
<div><br></div>
<div><br></div>
</div></div></div><div><div id="m_-2480324860683427736yahoo_quoted_1947016758" class="m_-2480324860683427736yahoo_quoted"><div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px;color:#26282a"><div></div></div></div></div><div><div id="m_-2480324860683427736yahoo_quoted_1947016758" class="m_-2480324860683427736yahoo_quoted"><div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px;color:#26282a"><div><div id="m_-2480324860683427736yiv0621367037"><div><div>Hi, everybody,</div><div>I have modeled a building in eQuest. The existing building has no thermostat on the baseboard units. I want to show the effect of control valve (thermostat) fitting on the building energy consumption . Modeling the units equipped with thermostat is Ok but I do not know how to model the same building without a thermostat or any trick I can use? </div><div>Your help is appreciated,</div><div><br></div><div>Thanks,</div><div><br></div><div>Ali</div>
</div></div></div></div></div></div><div><div id="m_-2480324860683427736yahoo_quoted_1947016758" class="m_-2480324860683427736yahoo_quoted"><div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px;color:#26282a"><div>_______________________________________________<br>Equest-users mailing list<br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>To unsubscribe from this mailing list send a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br></div>
</div>
</div></div></blockquote></div></div>