<div dir="ltr">Hi All,<div><br></div><div>does anyone have any experience with modeling the Loop to Loop Heat Pump chiller?  I'm getting the following error in my file, and right now I am auto-sizing everything just to test it to get the file to run.  I cannot locate/find where the Qhx Design, SupFlow, SupTi, SupTo key words are linked too.  The heat-Exchanger: HRC-T1 is the name of my LtLHP Chiller that I input on the loops.</div><div><br></div><div>I've looked through the DOE-2 documents for LtLHP chiller and I can't find where this error is occurring so that I can fix it.  Any insight you can offer will be appreciated.  </div><div><br></div><div>I've also attached my .pd2 & .inp files if anyone is inclined to look at them.  Thanks in advance for sharing your thoughts and your brains with me!</div><div><br></div><div><div><br></div><div> ***ERROR***********************************************************************</div><div>             Heat-Exchanger: HRC-T1                           has</div><div>             inconsistent design parameters:</div><div>              QhxDesign   SupFlow     SupTi     SupTo</div><div>               3541040.      708.      85.0      95.0</div><div>                          DemFlow     DemTi     DemTo</div><div>                             708.      85.0      75.0</div><div><br></div></div><div><br></div><div>Pasha</div><div>Ph: 308-763-1593</div></div>