<div dir="ltr"><p class="gmail-MsoNormal">Hi all<span></span></p>

<p class="gmail-MsoNormal">I had a query on how to actually model dual-heating system
using eQUEST “HEAT SOURCE” and “ZONE HEAT SOURCE” option<span></span></p>

<p class="gmail-MsoNormal">In my Case, RTU has gas furnace heating and it is used to
preheat the air, this preheated air is sent through the ducts and further this
air is reheated by Coils inside the zonal VAV Boxes before sending it to the
zones. <b>According to me this implies that my major consumption should be by gas furnace which is the HEAT SOURCE as
it is the one who actually heats the outside air</b>. Correct me if I am wrong.<span></span></p>

<p class="gmail-MsoNormal">In my model, I set FURNACE as “HEAT SOURCE” and Electric as “ZONE
HEAT SOURCE”.<span></span></p>

<p class="gmail-MsoNormal">But from result output I observed that ZONE HEAT SOURCE has
more consumption than the HEAT SOURCE (Electric space heating consumption more
than Gas space heating). This contradicts the statement I made before.<span></span></p><p class="gmail-MsoNormal">It seems that eQUEST always takes ZONE HEAT SOURCE as major source of heating.</p>

<p class="gmail-MsoNormal">Does anyone have insights on what should be done in this
case and correctly model this type of system.<span></span></p><p class="gmail-MsoNormal">Warm regards,</p><p class="gmail-MsoNormal">Tejas</p><p class="gmail-MsoNormal"><br></p><p class="gmail-MsoNormal"><br></p></div>