<div dir="ltr"><font color="#0c343d">Hi Kirti,</font><div><font color="#0c343d"><br></font></div><div><font color="#0c343d">My Comments are as follows within the mail.</font></div><div><div class="gmail_extra"><div class="gmail_quote"><br></div><div class="gmail_quote">---------- Forwarded message ----------<br>From: Kirti Pabrekar - Patil via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>To: "<a href="mailto:equest-users-request@lists.onebuilding.org">equest-users-request@lists.onebuilding.org</a>" <<a href="mailto:equest-users-request@lists.onebuilding.org">equest-users-request@lists.onebuilding.org</a>>, "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Date: Tue, 14 Feb 2017 19:04:33 +0530<br>Subject: [Equest-users] Modelling Non AC building in eQUEST<br><div dir="ltr"><div style="font-size:12.8px">Dear eQuesters, </div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">I have the following doubt.</div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">1. This is a hostel building. all the rooms are non ac except the wardens cabin and the counselling room. These two rooms have split units. <span style="font-size:small">   </span></div></div><div><br></div><div><font color="#0c343d">[SK]: So you can have only these rooms to be conditioned. </font></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">2. I have to model this for thermal comfort compliance - so i need to show that there are less unmet hours in the building. </span></div><div><font color="#0c343d"><br></font></div><div><font color="#0c343d">[SK]: You can also provide the SS-O and SS-N reports for showing thermal comfort conditions.</font></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">How do I go about this?</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">What i thought was as under,</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">1. I made the entire model and assigned the ac and non ac spaces as per design.</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">2. I plan to put a system in the non ac rooms, such that the CFM generated due to ceiling fans can be put as Fan Flow Parametres. A 12 hour fan schedule (as per the evening + night time occupancy hours) can be assigned to this. Other than this there will be no input parameter assigned to this system - no COP, no efficiency. Other than this these rooms have to behave as non ac spaces. </span></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div style="font-size:12.8px"><br></div></div></blockquote><div><br></div><div><font color="#0c343d">[SK]: To make any building non-ac you are required to have the FAN switched off for 24 X 7 hours.</font></div><div><font color="#0c343d">You are required to have OFF FAN schedule for the systems serving the non-ac areas.</font></div><div><font color="#0c343d">In this way you can have those areas as being served by not any HVAC fan or then there is no HVAC there installed.</font></div><div><font color="#0c343d">You can put any system and have the zone under it and then have all the time HVAC Fan to be switched off.</font></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">Now my questions,</span></div><div><span style="font-size:12.8px">1. Do you think this is logical way to do?</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">2. Is there any other way to go about this?</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">3. If what i have described in point 2 is okay, while i assigning systems what should it be? Like Sum or FNSYS or VAVS etc? Please let me know the specifics</span></div><div><font color="#0c343d"><br></font></div><div><font color="#0c343d">[SK]: I think this is the most simple way to do which i have suggested. </font></div><div><br></div><div><div dir="ltr"><div style="font-size:12.8px">Please give me an insight into this ya. </div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">Regards</div><div style="font-size:12.8px">Kirti</div><div style="font-size:12.8px"><br></div><div><div class="gmail-m_-5327892241012401286gmail_signature"><div dir="ltr"><div style="font-family:arial"><b>Kirti Pabrekar - Patil</b><br></div><div dir="ltr" style="font-family:arial"><div><span style="color:rgb(0,0,0)">M. Arch, LEED GA,</span></div><div><font color="#000000">IGBC AP, GRIHA Trainer & Evaluator,</font></div><div><br></div><div><font color="#3366ff"> </font></div><div><b><font color="#660000">Thanks,</font></b></div><div><font color="#0000ff"><b>Sharad.Kumar</b></font></div><div><em><br></em></div><div><br></div></div></div></div></div></div></div></div></div></div></div>