<div dir="ltr"><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">Hi Phil,</font></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d"><br></font></div><div style="text-align:left;font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">As far as modeling a basement half exposed is concerned, you are required to have the basement above the ground as an above grade floor.</font></div><div style="text-align:left;font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">Also then, kindly have the unexposed construction or the face facing the hill to be underground construction which will have light soil in the layer as well as very low U value meeting the thermodynamic conditions.</font></div><div style="text-align:left;font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">You can use the default underfloor constructions.</font></div><div style="text-align:left;font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">The layer will help you to have the properties like wall facing soil and low U value to meet the low heat transfer as far as hill is concerned.</font></div><div style="text-align:left;font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d">I think the default underfloor construction is such as that it would meet the requirements with low U value of 0.010 Btuh / sq. feet/ degree F.</font></div><div style="text-align:left"><font color="#0c343d"><font face="verdana, helvetica, sans-serif" size="3">As far as the hill part is concerned the result shall show it.</font></font></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><br></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><br></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><b><font color="#660000">Thanks,</font></b></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d"><b>Sharad.Kumar</b></font></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><font color="#0c343d"><b>..........................................................................................................................................................................</b></font></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><br></div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium">On Saturday, January 21, 2017, 8:29:20 AM PST, Philip Boutelle via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.<wbr>onebuilding.org</a>> wrote:</div><div style="font-family:verdana,helvetica,sans-serif;font-size:medium"><div id="gmail-m_-6982825770862817113yiv4220195385">Equest users,</div><div id="gmail-m_-6982825770862817113yiv4220195385"><br><div>I need to model a building that is built partially into a hillside, so that the basement is partially below grade. One wall of the basement is almost completely adjacent to earth, and the hill slopes pretty evenly down towards the opposite side, which is completely exposed. Any tips on how to reflect this in my model?</div><div>Thank for any help here, </div><div>-Phil</div></div></div><div class="gmail_extra"><br></div></div>