<div dir="ltr"><font color="#20124d">Hi Fallon,</font><div><font color="#20124d"><br></font><div><font color="#20124d">One can have a tree at the project name in the water side tab and then have a right click.<br></font></div><div><font color="#20124d">The required ground source heat exchanger is as follows:</font></div><div><br></div><div><img src="cid:ii_158dd3616748a7b3" alt="Inline image 1" style="margin-right:0px" width="429" height="253"><br></div><div><br></div><div><img src="cid:ii_158dd418eff9e0e2" alt="Inline image 2" width="477" height="327"><br></div><div><br></div><div><br></div><div><font color="#20124d">In this way one can attach the ground source heat water exchanger to the lake/well loop.</font></div><div><br></div><div><b><font color="#660000">Thanks,</font></b></div><div>Sharad.</div><div><br></div><div><br>---------- Forwarded message ----------<br>From: fallon walters via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuildin<wbr>g.org</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebui<wbr>lding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuildin<wbr>g.org</a>><br>Cc: <br>Date: Wed, 7 Dec 2016 14:05:40 +0000<br>Subject: [Equest-users] Errors when modeling a Loop-to-Loop Heat Pump<br><div lang="EN-CA"><div class="m_-2270817331237133100gmail-m_-60528878655272937gmail-m_-4955533078232834817Section1"><p class="MsoNormal">Hi everyone, <u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">I am trying to model a Series Fan-Powered VAV with HW Reheat through a Water to Water Heat Pump System.  We have 4 water to water heat pumps from a lake/well loop.  The heat pumps are serving 3 air handling units and then a VAV system serving the rooms.  <u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">When modeling this design I have a I am using both chilled water and hot water coils.  When modeling a chiller in the Wizard Mode, it does not let me model type as Heat Pump or Loop-to-Loop Heat Pump.  I then change the type in the Detailed Mode to a Loop-to-Loop Heat Pump, using a default Chilled Water Loop, default Hot Water Loop, and a Lake/Well Condensing Loop.   I keep coming up with several different errors.  My main error is that my condenser Loop (lake/well) does not have a primary heating source.  I have read online that a ground source heat exchanger need to be attached but I do not know how to add this heat exchanger and attach it to this loop.  <u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Am I modeling this correctly?<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Thanks, Fallon<u></u><u></u></p></div></div><br>______________________________<wbr>_________________<br>Equest-users mailing list<br><a href="mailto:Equest-users@lists.onebuilding.org" target="_blank">Equest-users@lists.onebuilding<wbr>.org</a><br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/l<wbr>istinfo.cgi/equest-users-onebu<wbr>ilding.org</a></div></div><div><br></div><div><br></div></div>