<div dir="ltr">Hi eQUESTers,<div><br></div><div>I am looking for confirmation that I understand how eQUEST is going to handle zonal exhaust air.</div><div><br></div><div>I have several zones that are supplied by an AHU and exhausted by a separate common EF.  The AHU also supplies other zones and air is returned from those zones to the AHU from the zones.</div><div><br></div><div>In the zones where air is exhausted directly, the E/A tracks the S/A.  </div><div><br></div><div>For the zones where there is direct E/A, will eQUEST match the O/A requirements caused by the E/A at the zone level or system level?  From my understanding, I believe it is at the system level but just want to confirm.</div><div><br></div><div>For example, let's say an AHU has a min O/A ratio of 0.2 and a zone has a design S/A flow = 100 CFM with direct E/A flow matching S/A flow (E/A = 100 CFM).  For this example, the design O/A from the AHU to Zone 1 will be 20 CFM.  </div><div>Will eQUEST boost the O/A requirements to Zone 1 to 100 CFM to match the E/A flow or will it bring that 100 CFM O/A requirement back the system level.</div><div><br></div><div>Thanks</div><div>Darryl</div></div>