<div dir="ltr"><font color="#20124d">Hi Saif,</font><div><font color="#20124d"><br></font></div><div><font color="#20124d">For rectifying the unmet load hours you can do the following things:</font></div><div><font color="#20124d"><br></font></div><div><font color="#20124d">1. Limit the number of zones per DX Package.</font></div><div><font color="#20124d">2. Just make the thermostat to proportional.</font></div><div><font color="#20124d">3. Just make the thermostat range 8 degree F. This makes the comfort condition from midst of the design condition to made enhanced abroad.</font></div><div><font color="#20124d">4. Just try to make the most high unmet load hour yielding or may be the most un-comfort to the control zone.</font></div><div><font color="#20124d">5. Make the DX HVAC having small zones as control zones. These can be unsatisfied ones.</font></div><div><font color="#20124d">6. Offset the thermostat schedule during off hours to more extremes.</font></div><div><font color="#20124d">7. For least mischievous ways one can deter the design conditions and thermostat schedules to some limits but this should be done under and by some supervised  authority.</font></div><div><br></div><div><font color="#990000"><b><br></b></font></div><div><font color="#990000"><b>Thanks.</b> </font></div><div><font color="#274e13">Sharad.</font><br><div class="gmail_extra"><div class="gmail_quote"><div><br><br>---------- Forwarded message ----------<br>From: Saif A via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>To: <a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br>Cc: <br>Date: Sun, 14 Aug 2016 11:20:48 -0500<br>Subject: [Equest-users] DX package for multi-zones<br><div dir="ltr"><span style="font-size:12.8px;color:rgb(69,69,69)">Hi everyone </span><div><font color="#454545"><span style="font-size:12.8px"><br></span></font><div style="font-size:12.8px;color:rgb(69,69,69)">I am working on multifamily project where there is a single DX package unit for each floor when I assign a package for all the floor zones I have a lot of unmet hours except for the thermostat zone, but if I assign a package unit for each zone I have zero unmet hours. so I am just wondering what causing this problem?</div></div><div style="font-size:12.8px;color:rgb(69,69,69)"><br></div><div style="font-size:12.8px;color:rgb(69,69,69)">Thank you,</div><div style="font-size:12.8px;color:rgb(69,69,69)"><br></div><div style="font-size:12.8px;color:rgb(69,69,69)">Saif,</div><div><br></div></div></div><div><br></div></div></div></div></div>