<div dir="ltr"><font color="#073763">Hi Siliang,</font><div><font color="#073763"><br></font></div><div><font color="#073763">I think that i was right in the discussion.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">The boiler set-point should be lower than the heating ground water steam exchanger.</font></div><div><font color="#073763"><br></font></div><div><span style="color:rgb(7,55,99)">See the following cases:</span><br></div><div><font color="#073763"><br></font></div><div><font color="#073763">1. The boiler set-point can be higher than the ground steam water heat exchanger if you apply some extra heat or fuel and you apply more than one fuel then it can be a hybrid boiler. So electricity can be the fuel to enhance the heat.</font></div><div><font color="#073763"><br></font></div><div><font color="#073763">2. If the boiler is of less size then there can not be any scope to increase the set-point of the boiler as there can not be any extra heat added to the boiler as it is only again a heat exchanger.</font></div><div><br></div><div><font color="#073763">The temperature that the 360 or 370 °F i am talking about is the steam coming out of the earth crust.</font></div><div><font color="#20124d"><br></font></div><div><b><font color="#20124d">Thanks,</font></b></div><div>Sharad.</div><div><br></div><div><br></div><div>---------- Forwarded message ----------<br>From: Siliang Lu via Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuildin<wbr>g.org</a>><br>To: Sharad Kumar <<a href="mailto:sharadcapricious@gmail.com" target="_blank">sharadcapricious@gmail.com</a>><br>Cc: equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuildin<wbr>g.org</a>>, <a href="mailto:equest-users-request@lists.onebuilding.org" target="_blank">equest-users-request@lists.one<wbr>building.org</a><br>Date: Mon, 8 Aug 2016 08:58:55 -0400<br>Subject: Re: [Equest-users] Boiler temperature for hybrid geothermal heat pump system<br><div dir="ltr"><div><div><div><div>Hi Sharad,<br></div> Thanks for your reply. <br> My design is ambient geothermal heat pump system. The water loop temperature ranges between 55-85F and the ground temperature is not so high as 360-370F. What I am wondering is that if the boiler setpoint could be much higher than ground heat exchanger setpoint if the size of boiler is much smaller than that of GHX? Thanks a lot!<br><br></div>Have a great day!<br><br></div>All the best,<br></div>Siliang</div></div><div><br><div class="gmail_extra"><br></div></div></div>