<div dir="ltr"><div><div><div><div>Hello,<br><br></div>I am trying to model a DOAS that supplies conditioned outside air to dwelling units.  It also has an ERV.  I have created a dummy zone with no loads and made the setpoints for the dummy zones my desired heating and cooling supply air temperatures (73F for heating and 75F for cooling).  However, the DOAS also has dehumidification in which it will operate in cooling mode to dehumidify at >60% RH.  There is no reheat coil, so when the system is dehumidifying, the supply air temperature should drop below the setpoint.  <br><br></div>Here is the issue I'm having.... when I look at my hourly reports, I can see that the air leaving the cooling coil will drop down to about 60F at times when the system is dehumidifying.  However, the dummy space is still showing a space temperature of ~74F.  How is this possible?  Does anyone have any ideas?<br><br></div>Thank you,<br></div>Mike C<br></div>