<div dir="ltr">Hello Every one ,<div><br></div><div>Thank you very much for your valuable support.</div><div><br></div><div>I have switched on day lighting and tried to take in multiple zones to increase the no of sensor points.</div><div><br></div><div>But yet the comparative analysis results are pretty much the same.I couldn't trace out the defect.</div><div>I will go through The GRIHA guideline as well .</div><div><br></div><div>Thank you,</div><div>Sitha.</div><div><br></div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, May 15, 2016 at 9:55 AM, Sharad Kumar via Equest-users <span dir="ltr"><<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><font color="#0b5394">Hi Sitha,</font><div><font color="#0b5394"><br></font></div><div><font color="#0b5394">I mean you are trying to analyse the WWR based analysis on different facades.<br></font></div><div><font color="#0b5394">Try configuring out different percentages of glazing percentage of the wall on different facades and analyse it.</font></div><div><font color="#0b5394">If one has to get the same overall load then one can increase equipment or lighting load by iterating it.</font></div><div><font color="#0b5394">For purpose you can have different WWR on different facades.</font></div><div><font color="#0b5394">As per me in Northern hemisphere of the globe one can get the best as facade as North west which can have the best  varying WWR and South or south west as worst facade which can have least varying WWR.</font></div><div><font color="#0b5394">For reference you can have a look at the GRIHA guideline volume-3 as it has that section which has window glazing and WWR based insolation and other discussions.</font></div><div><font color="#0b5394"><br></font></div><div><font color="#0b5394">So as per me if you have to take least amount of WWR then choose south-west.</font></div><div><font color="#0c343d"><br></font></div><div><font color="#0c343d"><br></font></div><div><font color="#0c343d"><b>Thanks,</b></font></div><div><div><font face="georgia, serif"><font color="#cc0000">Sharad.Kumar</font><font color="#660000">|</font><font color="#0b5394">Engineer.</font></font></div><div><font face="georgia, serif" color="#38761d">Green Horizon Consulting LLP.</font></div><div><font face="georgia, serif" color="#38761d">Gurgaon.</font></div><div><font face="georgia, serif" color="#38761d">India.</font></div></div><div><font face="georgia, serif" color="#38761d"><br></font></div><div><br style="font-size:12.8px"><span style="font-size:12.8px">---------- Forwarded message ----------</span><span class=""><br style="font-size:12.8px"><div dir="ltr" style="font-size:12.8px"><div class="gmail_default" style="font-family:georgia,serif"><div class="gmail_default"><br></div></div></div><div class="gmail_extra" style="font-size:12.8px"><div class="gmail_quote">On Thu, May 12, 2016 at 2:33 PM, Sitha mahalakshmi Pathuri via Equest-users <span dir="ltr"><<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>></span> wrote:</div><div class="gmail_quote"><br></div><div class="gmail_quote"><span style="font-size:12.8px">Hello everyone,</span><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">I have been doing an academic project where i am trying to find out the best percentage of facade glazing which results in optimal energy consumption in IT office building.</div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">Is there a possibility of doing parametric studies pertaining to change in facade glazing percentage or lets say WWR.</div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">I tried a floor plan with three different types of glasses and different percentages.</div><div style="font-size:12.8px">But as i reduce the facade percentage from 100% to 30%  the energy consumption report says that there is reduction in energy consumption.but There is no difference in lighting loads . the only change in the report is for space cooling. The reduction in the glazing definitely results in increase in lighting loads in a fully conditioned office building.  </div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">This is not being projected in the results.could some one help me on how to proceed in this regard.</div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">Thanking you,</div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px">P.Sitha</div><div style="font-size:12.8px">Pursuing M.Arch</div></div></div></span></div><div><font face="georgia, serif" color="#38761d"><br></font></div></div>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br></div>