<div dir="ltr"><font color="#0000ff">Dear Pramod,</font><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">Kindly have a go through the the following equation.</font></div><div><font color="#0000ff"><br></font></div><div><img src="cid:ii_154607f978374d05" alt="Inline image 1" width="418" height="197"><br></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">As you know the rpm of the motor of the pump is dependent upon frequency and number of poles.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">The amplification by induction is used to change the frequency of the motor and hence the frequency of the motor which results in the higher or lowered rpm of the motor and hence variable speed of the motor of the pump and hence on the help of micro processor controllers the resulting demand based flow. Hence energy savings.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">The energy savings have been brought about as the flow of the pump is as per the demand based flow. When there is demand based flow the demand is met properly as the constant flow does not determines the rate at which the requirement has to be met so the VFD helps in meeting the requirement or demand. If the demand is met at right time so the consumption would be less. I mean for constant volume the flow is constant but the flow is variable and hence the meeting demand can be best condition to fulfill the wish of the intent to meet the demand.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">Thanks,</font></div><div><font color="#0000ff">Sharad.Kumar</font></div><div><font color="#0000ff">Green Horizon Consulting LLP</font></div><div><font color="#0000ff">Gurgaon</font></div><div><font color="#0000ff">India.</font></div><div><font color="#0000ff">.............................................................................................................</font></div><div><font color="#0000ff">To</font>day's Topics:</div><div><br>   1. VFD vs constant pump (Pramod .D via Equest-users)<br>   2. Re: [Bldg-sim] How to mirror a building in eQUEST<br>      (Keith Swartz via Equest-users)<br>   3. Re: [Bldg-sim] How to mirror a building in eQUEST<br>      (Xiangjin Yang via Equest-users)<br><br><br>---------- Forwarded message ----------<br>From: "Pramod .D via Equest-users" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Date: Thu, 28 Apr 2016 09:20:58 +0000<br>Subject: [Equest-users] VFD vs constant pump<br><div lang="EN-US" link="#0563C1" vlink="#954F72"><p class="MsoNormal">Hi All,<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">I am simulating a model to see the savings provided by VFD pump connected to the DHW plant loop. The energy used by the VFD pump is less compared to constant volume pump. The problem is the energy usage of DHW increases if constant volume pump is changed to VFD. Is this correct or am I missing anything?  How does VFD pumps increases DHW usage?<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Thanks!<u></u><u></u></p><p class="MsoNormal">Pramod</p></div></div></div>