<div dir="ltr"><div><div>Hello,<br><br></div>Hoping someone can help me out here.  I am modeling a PSZ heat pump with ERV as a DOAS.  It is supposed to dehumidify to keep RH below 60%.  It appears to be doing this currently based on the hourly reports.  However, I need to also model an electric resistance coil that will reheat the dehumidified air back up to 73F.  Does anyone know how I can accomplish this with PSZ?  I've tried making "ZONE-HEAT-SOURCE" electric resistance, but this does not seem to have any effect at all.  I also thought about applying preheat to the zones served by the DOAS but  it states in the item description that preheat is appled to the mixed air flow, not just outside air so that won't work for me.  Any recommendations?<br><br></div><div>Thank you,<br></div><div>Mike C<br></div></div>