<div dir="ltr"><font color="#0000ff">Hi Jose,</font><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">I have tried to configure out the size and capacity of the hot water system for apartments.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">The result is that on the page 7-4 of ASHRAE users manual the calculations have been given.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">The snap-shot has been post -scripted after this statement:</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff"><img src="cid:ii_1544bd638f7e8f5c" alt="Inline image 1" width="300" height="418"><br></font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">As per the curve one can bring about the hot water storage and recovery capacity of the hot water cycle.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">As in above example the number of units in the apartments is 80 so the 75 number has been chosen from the curve which is less than 80 and the calculations have been done to bring </font><span style="color:rgb(0,0,255)"> about</span><span style="color:rgb(0,0,255)"> the recovery capacity and hot water storage.</span></div><div><span style="color:rgb(0,0,255)"><br></span></div><div><span style="color:rgb(0,0,255)">The corresponding numbers have been chosen as per the curve chart and hence the recovery capacity and usable storage has been found out.The 1.4 factor has been considered as the consideration is </span><span style="color:rgb(0,0,255)">70% age useful storage capacity of the tank.</span></div><div><span style="color:rgb(0,0,255)"><br></span></div><div><span style="color:rgb(0,0,255)">The next page</span><font color="#0000ff"> on User's manual i suppose is the efficiency of the hot water system. This is the help from my side. Hope another comments may help you may be more.</font><br></div><div><br></div><div><br></div><div><font color="#0000ff">Thanks,</font></div><div><font color="#0000ff">Sharad.Kumar</font></div><div><font color="#0000ff">Gurgaon,</font></div><div><font color="#0000ff">Greenn Horizon Consulting LLP.</font></div><div><font color="#0000ff">India.</font></div><div><font color="#0000ff">.............................................................................................................</font></div><div><font color="#0000ff"><br></font></div><div>Today's Topics:<br><br>   1. Hot water use (gal/person/day) in residences in   eQuest 3.65<br>      (Jos? Luis Berm?dez Alcocer via Equest-users)<br><br><br>---------- Forwarded message ----------<br>From: "José Luis Bermúdez Alcocer" <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>To: Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Date: Sun, 24 Apr 2016 17:31:05 +0000 (UTC)<br>Subject: [Equest-users] Hot water use (gal/person/day) in residences in eQuest 3.65</div><div><br><div><div style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif"><div>To whom it may concern:</div><div><br></div><div>What is the hot water use (gal/person/day) in residences according to the ASHRAE manuals?  Any comments will be highly appreciated!</div><div><br></div><div>Kind regards,</div><div><br></div><div>Jose Luis Bermudez Alcocer, Ph.D., M.Arch., B.Arch.<br></div></div></div><br>_______________________________________________<br>Equest-users mailing list<br><a href="mailto:Equest-users@lists.onebuilding.org" target="_blank">Equest-users@lists.onebuilding.org</a><br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a></div></div>