<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote"><div><font color="#0000ff">Hi Jose,</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">I think you can have a near around measure with the slab thickness and steel deck configuration. The major concept in energy simulation  to have a basic slab thickness is to derive the basic conductance of the slab so have a basic understanding of the slab configuration, thickness and eQUEST inputs.</font></div><div><font color="#0000ff">The major issue can be the slab thickness.You can configure the slab conductance by having mere slab thicknesses.The concrete slab is helping to derive the conductance and heat transfer. There are certain U value calculators which helps in deriving the conductance in excel. But the slab thickness is going to have the major issue.</font></div><div><font color="#0000ff">This may also help you in configuring the needs.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">Thanks,</font></div><div><font color="#0000ff">Sharad.Kumar</font></div><div><font color="#0000ff">Green Horizon Consulting LLP</font></div><div><font color="#0000ff">Gurgaon.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff"><br></font></div><div>Today's Topics:<br><br>   1. Simulation of a Steel Deck + concrete for an office building<br>      in eQuest 3.65 (Jos? Luis Berm?dez Alcocer)<br>   2. Hot Water for Boilers with LP Gas for office building in<br>      Mexico City using eQuest 3.65 (Jos? Luis Berm?dez Alcocer)<br>   3. Re: Simulation of a Steel Deck + concrete for an office<br>      building in eQuest 3.65 (John Aulbach)<br><br><br>---------- Forwarded message ----------<br>From: "José Luis Bermúdez Alcocer" <<a href="mailto:beralco@yahoo.com.mx" target="_blank">beralco@yahoo.com.mx</a>><br>To: Equest-users <<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a>><br>Cc: <br>Date: Sun, 27 Mar 2016 01:49:57 +0000 (UTC)<br>Subject: [Equest-users] Simulation of a Steel Deck + concrete for an office building in eQuest 3.65<br><div><div style="color:rgb(0,0,0);font-family:HelveticaNeue-Light,'Helvetica Neue Light','Helvetica Neue',Helvetica,Arial,'Lucida Grande',sans-serif;font-size:16px"><div>To whom it may concern:</div><div><br></div><div dir="ltr">I need to simulate in eQuest a steel deck with poured concrete over it for a slab and a roof of an office building.  I found steel siding in the drop menu in eQuest.  I am not sure if I could use this material to "trick" the software and simulate a steel deck.  Has anybody done something similar?</div><div dir="ltr"><br></div><div dir="ltr">Kind regards,</div><div dir="ltr"><br></div><div dir="ltr">Jose Luis Bermudez Alcocer, Ph.D., M.Arch., B.Arch.</div></div></div></div></div></div></div>