<div dir="ltr"><div><span style="font-size:12.8000001907349px">Hello eQuest-ers,</span></div><span style="font-size:12.8000001907349px"><div><span style="font-size:12.8000001907349px"><br></span></div>Has anyone ever ran into an issue (using either eQuest 3.64 or 3.65) with importing a CAD file and eQuest having trouble translating the lines properly?</span><div style="font-size:12.8000001907349px"><br></div><div style="font-size:12.8000001907349px">I've attached an image which shows eQuest's version of my CAD file on the left and my actual CAD file on the right. If you look closely, you'll see several deviations between eQuest line and CAD lines...eQuest seems to be mis-shaping my zones (for example, the top line should be a straight line all the way along, but eQuest has added a different angle to the line on the top left zone).</div><div style="font-size:12.8000001907349px"><br></div><div style="font-size:12.8000001907349px">Anyone seen this and found a fix for this?</div><div style="font-size:12.8000001907349px"><br></div><div style="font-size:12.8000001907349px">If it matters, my CAD file is DXF 2000 format (but I've also tried other formats with the same results).</div><div style="font-size:12.8000001907349px"><br></div><div style="font-size:12.8000001907349px">Thanks,</div><div style="font-size:12.8000001907349px">Chris</div></div>