<div dir="ltr"><font color="#0000ff">Hi Pranita,</font><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">The thing that you can do is to change the Z coordinate in detailed mode to be one above another. For this you will have to go in detailed mode then use the building shell to get the floor properties window.</font></div><div><font color="#0000ff">You can see that the Z coordinate in the below example is 24 ft.</font></div><div><font color="#0000ff">Similarly, one can input the respected floors Z coordinate as per the elevation of the building.</font></div><div><font color="#0000ff">For example in your case if the E5 is having floor height 48 ft, then you can input the respected 48 ft in Z coordinate and remaining 12, 24 ,36 in E2 , E3, E4 respectively. This is as per assumption that for each floor height the floor to floor height is 12 ft.</font></div><div><font color="#0000ff">Similarly you will have to input various z coordinates for each floor to be in order.</font></div><div><font color="#0000ff">Find the window to be edited below as an example.</font></div><div><br></div><div><img src="cid:ii_14e24f1001739f2d" alt="Inline image 2" width="418" height="323"><br></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">You will have to do it for each floor. You will have to manipulate the things as per your case.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">Thanks,</font></div><div><font color="#0000ff">Sharad</font><div class="gmail_extra"><div class="gmail_quote"><br></div></div></div></div>