<div dir="ltr">Hello All -<div><br></div><div>I am working on a multistory building with 15 floor types (E1 to E15). After doing all the 15 shell types we have decided to split the E1 into 5 different shells (E1, E1a, E1b, E1c, E1d) since the zoning is very different on each of these floors.</div><div><br></div><div>I was able to create new shells( by copying data from E1) and place them above the corresponding floor. I am having issues when it comes to placing my E2 above E1d. </div><div><br></div><div>In the schematic design wizard screen 1, in Posiiton this shell immediately above............... (where we have to pick the shell from the drop down list), here I do not see the E1d shell (which I created after all the above above shells were created.</div><div><br></div><div>I changed the prefix names to E1a  to E1d instead of using the default eQuest names. </div><div><br></div><div>Currently E2 says its above E1, instead it has to be above E1d. The drop down list does not show E1d. I saved and simulated the model assuming it might then populate the new shells in the drop down list. This did not work.</div><div><br></div><div>Any thoughts on how to fix this.</div><div><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><p style="margin:0in 0in 0pt"><b><font size="3"><font color="#006600" face="Calibri">- Pranita </font></font></b></p><br></div>
</div></div>