<div dir="ltr"><font color="#0000ff">Dear Shilpa,</font><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">This may occur if your model is quite big or heavy.</font></div><div><span style="color:rgb(0,0,255)">It can be so as the building model is quite heavy so the eQUEST is sometime incapable to let you view the glazing.</span><br></div><div><span style="color:rgb(0,0,255)">Sometimes its eQUEST's limitation.</span></div><div><font color="#0000ff">So the remedy can be just try to have a right click aloof of the building structure and click reset camera.</font></div><div><font color="#0000ff">If this also does not help then try going to different tabs like internal loads or air and water side tabs and return to building shell and repeat reset camera.</font></div><div><font color="#0000ff">Hope this may help.Just go in a hit and trial for views. If this does not help then may be there can be other issues.</font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff"><br></font></div><div><font color="#0000ff">Thanks,</font></div><div><font color="#0000ff">Sharad.Kumar</font></div><div><font color="#0000ff">Green Horizon Consulting LLP</font></div><div><font color="#0000ff">Gurgaon</font></div><div><font color="#0000ff">India.</font></div><div><font color="#0000ff"><br></font><div class="gmail_extra"><div class="gmail_quote"><div> </div><div>On Thu, Jun 11, 2015 at 3:51 AM, shilpa surana <span dir="ltr"><<a href="mailto:surana.shilpa@gmail.com" target="_blank">surana.shilpa@gmail.com</a>></span> wrote:</div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div><div class="gmail_extra"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Fellow eQuest users,</div><div><br></div><div>I am drawing external glazing in the wizard mode, however, when I exit out of the wizard mode, the glazing does not show up. I can see the glazing in the plan view, however, I cant get them to display in 3D View. I am using eQuest 3.64. Has anyone faced similar issues?</div><div><br></div><div>Best,</div><div>Shilpa Surana <br></div><div><div><br></div></div></div></blockquote></div></div></div></div></div></blockquote></div></div></div></div>