<div dir="ltr"><div>Dear all:</div><div> </div><div>I'm modeling a 700000 sqft warehouse, everything works fine, except in BEPU report it shows a <span lang="EN">360.310 KWH     /SQFT-YR GROSS-AREA, which doesn't make any sense. The utility rates are correct, under Quality control reports, it indicates errors of the peak lighting load of 67.74 w/sqft and peak miscellaneous equipment load of 40.91 w/sqft. I did input LPD and EPD with around 0.6 w/sqft and 0.5 w/sqft, the corresponding schedules are correct, the building area in each floor and each zone are correct, the total energy demand looks about right for the size of building.<p>But at some point the model makes the LPD output 100 times bigger than what I input, <font color="#274e13">I would appreciate it if you could provide me with any advices, thanks!</font></p><p><font color="#274e13">Qing</font></p><p> </p><font face="Verdana" size="1"><p> </p><font face="Verdana" size="1"><p> </p><p> </p></font><p> </p></font><p> </p><font face="Verdana" size="1"><p> </p><font face="Verdana" size="1"><p> </p><p> </p></font></font></span></div></div>