Proj   "Chiller-Boiler Lockout"  
   ProgramVersion = "eQUEST 3.64.7130"
   BDBaseVersion = 24
   ProductCode = "eQUEST"
   WeatherFile = "CZ2\CZ14.bin"
   CreateDate = 1298874976
   ModDate = 1310249833
   RunDate = 1310248699
   LibraryFile = "eQ_Lib.dat"
   ActiveMode = 0
   InputModule = 3
   InterfaceMode = 1
   AllowWizard = 1
   InputUnitsType = "English"
   OutputUnitsType = "English"
   DetailedModelEdits = 1
   ProjTreeType[4] = 1
   ProjTreeID[4] = 10650000
   ProjTreeLabel[4] = "Chiller1a (ElCentHerm)"
   ..

MainWiz   "Chiller-Boiler Lockout"  
   ProductCode = "eQUEST"
   WizardType = "Schematic Design"
   DebugID = 0
   AllowCustWinDoor = 1
   ScreenIDArrIdx = 40
   ScreenIDArrID = 250
   State = "China Lake Area (CZ14)"
   Location = "Barstow"
   BldgType = "Office Bldg, High-Rise"
   A901BldgType = "Office"
   ..

ShellWiz   "Bldg Envelope & Loads 1"  
   BldgType = "Office Bldg, High-Rise"
   NumMCZnGrps = 0
   DiagLink = "Bldg Envelope & Loads 1 Diag Data"
   ZoningCurrent = 1
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "Underground Areas", "Ground Floor Core", 
                     "Ground Floor Perimeter", "Typical Floor(s) Core", 
                     "Typical Floor(s) Perimeter", "Top Floor Core", 
                     "Top Floor Perimeter" )
   CustomRoofZoning = -1
   LastFootprint = 1
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent = ( 1, 1, 1 )
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[201] = 1
   DayltZones[202] = 1
   DayltZones[203] = 1
   DayltZones[204] = 1
   DayltZones[205] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[201] = 0
   BDLNumDayltCtrls[202] = 0
   BDLNumDayltCtrls[203] = 0
   BDLNumDayltCtrls[204] = 0
   BDLNumDayltCtrls[205] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   SchedDayFlag1[2] = 0
   SchedDayAssign1[6] = 0
   SchedDayAssign1[7] = 0
   SchedDayAssign1[8] = 0
   SchedOpen1[1] = "Midnt"
   SchedClose1[1] = "Midnt"
   DaylitAreaCurrent = ( 1, 1, 1 )
   RoofZoneErrorCode = 4
   ..

ZnGrpWiz   "Ground Floor Core"  
   ShortName = "GndCor"
   ..

ZnGrpWiz   "Ground Floor Perimeter"  
   ShortName = "GndPrm"
   ..

ZnGrpWiz   "Typical Floor(s) Core"  
   ShortName = "TypCor"
   ..

ZnGrpWiz   "Typical Floor(s) Perimeter"  
   ShortName = "TypPrm"
   ..

ZnGrpWiz   "Top Floor Core"  
   ShortName = "TopCor"
   ..

ZnGrpWiz   "Top Floor Perimeter"  
   ShortName = "TopPrm"
   ..

DiagData   "Bldg Envelope & Loads 1 Diag Data"  
   ..

HVACWiz   "HVAC System 1"  
   HVACSysType[1] = "Dual Duct Air Handler with HW Heat"
   SFanType[1] = "Forward Curved Centrifugal w/ Inlet Vanes"
   RFanType[1] = "Forward Curved Centrifugal w/ Inlet Vanes"
   EconomizerType[1] = "- none -"
   ColdDeckReset[1] = "- none -"
   CoolOccTemp[1] = 72
   MinAllowedAirflow[1] = 1
   ..

DXCWWiz   "Water-Cooled DX System"  
   ..

WSECWWiz   "Wtr-Side Econo System"  
   ..

WLHPWiz   "WSHP System"  
   ..

GSHPWiz   "GSHP System"  
   ..

PrimWiz   "Primary HVAC Plant"  
   ..

DHWWiz   "DHW Plant 1"  
   ..

FacetColor   "By Wall Type"  
   FacetType = "Walls"
   ColorOption = "By Wall Type"
   ..

FacetColor   "By Construction"  
   FacetType = "Walls"
   ColorOption = "By Construction"
   ..

FacetColor   "Uniform"  
   FacetType = "Windows"
   ColorOption = "Uniform"
   ..

FacetColor   "By Glass Type"  
   FacetType = "Windows"
   ColorOption = "By Glass Type"
   ..

Light3D   "Light3D - Default"  
   Type = "Default"
   ..

Light3D   "Light3D - User1"  
   Type = "User Defined 1"
   ..

Light3D   "Light3D - User2"  
   Type = "User Defined 2"
   ..

Light3D   "Light3D - User3"  
   Type = "User Defined 3"
   ..

Light3D   "Light3D - User4"  
   Type = "User Defined 4"
   ..

Light3D   "Light3D - User5"  
   Type = "User Defined 5"
   ..


END_OF_FILE