<div dir="ltr"><div><div><div><div><div><div><div>Hello all,<br><br></div>I got an error regarding zero design flow in hot water loop. The heating system is electric hot water generator and main heating source is at AHU level. There are no terminal heating source. Therefore, I modeled as Heat Source: Hot water Loop and Zone Heat Source: Not Installed. When I run simulation, it got stuck at 18% and gives error :Zero Design flow in hot water loop.<br>
<br></div>And When I also modeled Zone Heat Source: Hot water loop, then simulation runs fine.<br><br></div>Any idea what I miss?<br><br></div>Thanks in advance.<br><br></div>Regards,<br></div>Mayank Bhatnagar<br></div>Energy Analyst <br>
</div>