<p>Hey eQuest users,<br>
I have a new challanging  requirement in the appendix G section G3.1.2.8,  its required the supply air-to room air cooling temperature difference is 20 degrees for each HVAC system. Now my question is how can i achieve this if my baseline is system 8 and the chilled water leaving temperature is specified 44 F with return delta t=12,at the same time that in my design the indoor thermostat temp=71.6 F , and the supply cooling temp should be 51.6F,  here when i set this value i got an error in eQuest stating that" the cooling coil leaving temperatures must be at least 6 F higher than  entering water temp" and when i set the cooling supply air temp below 55 F trying to achieve the 20 degree difference, i got this error.<br>

I hope if any one can help,who may face this in baseline model.<br>
Thanks.</p>
<p>Hala Jaber<br>
Sustainablity Design Engineer.<br>
</p>