<div dir="ltr"><p class="MsoNormal">Hello eQuest community</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I’ve been using eQuest on a basic to moderate level for a
while, and am starting to get into more detailed modeling.</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">What I have now is a building with boilers in a basement
that get fresh air from a 100% OA supply fan.  The fan is interlocked with
the boilers so that it only supplies air when the boilers are burning
fuel.  The fan also has a hot water coil to keep the air at a minimum
temperature to prevent thermal shock of the boilers.</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I’m pretty sure I’ve got the heating figured out, but how do
I link the fan schedule to the boiler operation schedule?</p>

<p class="MsoNormal">An answer to this will definitely help in figuring out
interlocking other equipment in eQuest</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Thank you all for your help!</p>

<p class="MsoNormal">Shawn</p><p class="MsoNormal"><br></p><div><div dir="ltr">Shawn Maurer, EIT<br>Building Energy Specialist<div></div><div>University of Illinois - Urbana Champaign</div><div>Smart Energy Design Assistance Center</div>
</div></div>
</div>