<div dir="ltr"><div>ASHRAE 90.1. Appendix G says that, even if a zone is heating only in the actual building, a cooling system identical to that in the baseline system should be modeled in the as-built model with intermittent fan operation to meet the loads. I have seen projects with zones that have only unit heaters with no cooling air supply. eQuest does not allow for modeling of any cooling system in a zone with a unit heater. What would be your approach to solving this problem? </div>
<div> </div><div>I would appreciate it very much if you could help me with this question.</div><div> </div><div>Thank you very much in advance for your suggestions,</div><div> </div><div>Best Regards,</div><div>Simge Andolsun, PhD.</div>
</div>