<div dir="ltr">Dear all,<div><br></div><div>I'm modeling a commercial kitchen under the LEED for Retail rating system.</div><div><br></div><div>Per the end use classifications in the LEED template Section 1.6 Table EAp2-4, its seems advisable to have process loads output from eQUEST separately along the lines of Refrigeration, Cooking, commercial kitchen equipment.</div>
<div><br></div><div>I currently have all of them lumped under equipment loads in two different HVAC zones which makes the program output all the consumption under one heading 'miscellaneous equipment'.  This captures the equipment's latent and sensible contribution to heating and cooling loads. (Accurate but no breakdown)</div>
<div><br></div><div>If I created separate meters and input the process equipment as direct loads, I'm unable to assign the heat they emit to any particular HVAC zone which is unacceptable considering their contribution to the heating and cooling loads. Kind of a catch-22. This method also does not allow differentiation between sensible and latent contributions. (Broken down but not accurate)</div>
<div><br></div><div>Is there a workaround?</div><div><br></div><div>Thank you,</div><div>Ramana.</div></div>