<div dir="ltr">All, <div><br></div><div>I am setting up an eQUEST model following ASHRAE 90.1 - 2007 for LEED submission. I am setting up the space/zone OSA ventilation rates based on the scheduled vals given in the mechanical drawings by dividing the scheduled cfm by the sq ft of the space the particular system serves. I input these vals in the "Infiltration Flow" space on the Infiltration tab of the space properties, or it's also the "A-C Infiltration Flow" column under the space infiltration spreadsheet.</div>
<div><br></div><div>My question is what value should be input for the plenum infiltration? My initial thought is it should be zero, as no OSA flow should be provided to the plenum. Any reason it should be otherwise?</div>
<div><br></div><div>Thanks!</div><div><br></div><div>Ryan</div></div>