<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:10pt">Kathryn:<br><br>You can add Process/DHW loads to your WLHP as Mbtu/h. The schedule needs to be a fraction so you can't maintain a certain loop temperature, just a fraction of the Mbut/h per hour based on time of year.. I did one project where I need to add heat to the loop and I wrote a summer/winter schedule. The boiler/Process Load was off during the summer and I adjusted the winter fractions to eliminate loop errors.<br><br>This job was in Boston. I ended up with a summer schedule starting April 15 (no aux heat) until December 31, when the fractional schedule kicked in until April 14.<br><div><span><br></span></div><div> </div><div>Paul Diglio</div><div><br><br></div><div>87 Fairmont Avenue<br>New Haven, CT 06513<br>203-415-0082</div><br> <div style="font-family: times new roman, new york, times,
serif; font-size: 10pt;"> <div style="font-family: times new roman, new york, times, serif; font-size: 12pt;"> <div dir="ltr"> <hr size="1"> <font size="2" face="Arial"> <b><span style="font-weight:bold;">From:</span></b> Kathryn Kerns <kathryn.kerns@bceengineers.com><br> <b><span style="font-weight: bold;">To:</span></b> James Hansen <JHANSEN@ghtltd.com>; Nick Caton <ncaton@smithboucher.com>; Steve Woolery <steve.woolery@bceengineers.com>; equest-users@lists.onebuilding.org <br> <b><span style="font-weight: bold;">Sent:</span></b> Thursday, August 15, 2013 3:20 PM<br> <b><span style="font-weight: bold;">Subject:</span></b> Re: [Equest-users] LEED Issue with EQuest Software's Ability toModelBoilers on Ground Loops<br> </font> </div> <div class="y_msg_container"><br><div id="yiv998477155">
<style><!--
#yiv998477155 font-face
{font-family:"Cambria Math";}
#yiv998477155 font-face
{font-family:Calibri;}
#yiv998477155 font-face
{font-family:Tahoma;}
#yiv998477155 p.yiv998477155MsoNormal, #yiv998477155 li.yiv998477155MsoNormal, #yiv998477155 div.yiv998477155MsoNormal
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv998477155 a:link, #yiv998477155 span.yiv998477155MsoHyperlink
{
color:blue;text-decoration:underline;}
#yiv998477155 a:visited, #yiv998477155 span.yiv998477155MsoHyperlinkFollowed
{
color:purple;text-decoration:underline;}
#yiv998477155 p
{
margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv998477155 p.yiv998477155MsoAcetate, #yiv998477155 li.yiv998477155MsoAcetate, #yiv998477155 div.yiv998477155MsoAcetate
{
margin:0in;margin-bottom:.0001pt;font-size:8.0pt;font-family:"Tahoma", "sans-serif";}
#yiv998477155 span.yiv998477155BalloonTextChar
{
font-family:"Tahoma", "sans-serif";}
#yiv998477155 p.yiv998477155msochpdefault, #yiv998477155 li.yiv998477155msochpdefault, #yiv998477155 div.yiv998477155msochpdefault
{
margin:0in;margin-bottom:.0001pt;font-size:10.0pt;font-family:"Times New Roman", "serif";}
#yiv998477155 span.yiv998477155emailstyle18
{
font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv998477155 span.yiv998477155emailstyle20
{
font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv998477155 span.yiv998477155emailstyle22
{
font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv998477155 span.yiv998477155balloontextchar0
{
font-family:"Tahoma", "sans-serif";}
#yiv998477155 span.yiv998477155EmailStyle26
{
font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv998477155 .yiv998477155MsoChpDefault
{
font-size:10.0pt;}
#yiv998477155 div.yiv998477155WordSection1
{}
--></style>
<div>
<div id="yiv998477155idOWAReplyText3398" dir="ltr">
<div dir="ltr"><font size="2" color="#000000" face="Arial">James and Nick and everyone, </font></div>
<div dir="ltr"><font size="2" color="#000000" face="Arial"></font> </div>
<div dir="ltr"><font size="2" color="#000000" face="Arial">I have already explained to LEED that the proposed energy model has no error messages, no unmet hour issues and showed them the BEPS and PV-A reports. </font></div>
<div dir="ltr"><font size="2" color="#000000" face="Arial"></font> </div>
<div dir="ltr"><font size="2" color="#000000" face="Arial">Maybe if I printed out all the other PV reports that show the ground loop and ground pump part load performance and point out that the ground loop never reaches 100% part load and the pump only reaches 100% part load for 1 hour? Maybe I could generate the custom report for the ground loop temperatures and attach all this information to the exceptional calculation block? </font></div>
<div dir="ltr"><font size="2" color="#000000" face="Arial"></font> </div>
<div dir="ltr"><font size="2" color="#000000" face="Arial">The problem is, I am not sure adding more reports fits with their demand for either a modeled boiler or an exceptional calculation.</font></div>
<div dir="ltr"><font size="2" face="Arial"></font> </div></div>
<div dir="ltr">So back to the first question- does anyone know how to attach a boiler to a HP Water Loop that also has a ground loop HX and run the model successfully?<br>
<hr tabindex="-1">
<font size="2" face="Tahoma"><b>From:</b> James Hansen [mailto:JHANSEN@ghtltd.com]<br><b>Sent:</b> Thu 8/15/2013 11:57 AM<br><b>To:</b> Kathryn Kerns; Nick Caton; Steve Woolery; equest-users@lists.onebuilding.org<br><b>Subject:</b> RE: [Equest-users] LEED Issue with EQuest Software's Ability toModelBoilers on Ground Loops<br></font><br></div>
<div>
<div class="yiv998477155WordSection1">
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';">Sorry, I assumed since you could add a boiler to a WSHP loop that you could run it too :)</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';">Indeed there is an error when processing.</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';">You could always add the boiler load as a process load (in order to get unmet load hours down).</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';">However, you don't have an issue with unmet load hours right? If there is a boiler that shows up in your proposed design (ie contract documents) that is there for backup, but your hourly reports show that you don't need one, just submit hourly reports and explain this.</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span> </div>
<div>
<div class="yiv998477155MsoNormal"><b><span style="FONT-SIZE:11pt;COLOR:teal;FONT-FAMILY:'Arial', 'sans-serif';">GHT Limited<br></span></b><b><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Arial', 'sans-serif';">James Hansen, P.E., LEED AP</span></b><span style="FONT-SIZE:10pt;COLOR:#1f497d;FONT-FAMILY:'Arial', 'sans-serif';"><br>Senior Associate<br>1010 N. Glebe Road, Suite 200<br>Arlington, VA 22201-4749<br>703-243-1200 (office)</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#1f497d;FONT-FAMILY:'Arial', 'sans-serif';">703-338-5754 (cell)<br>703-276-1376 (fax)</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#1f497d;FONT-FAMILY:'Arial', 'sans-serif';"><a rel="nofollow" title="http://www.ghtltd.com/" target="_blank" href="http://www.ghtltd.com/">www.ghtltd.com</a></span><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span></div></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;FONT-FAMILY:'Calibri', 'sans-serif';"></span> </div>
<div>
<div style="BORDER-RIGHT:medium none;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;PADDING-LEFT:0in;PADDING-BOTTOM:0in;BORDER-LEFT:medium none;PADDING-TOP:3pt;BORDER-BOTTOM:medium none;">
<div class="yiv998477155MsoNormal"><b><span style="FONT-SIZE:10pt;FONT-FAMILY:'Tahoma', 'sans-serif';">From:</span></b><span style="FONT-SIZE:10pt;FONT-FAMILY:'Tahoma', 'sans-serif';"> Kathryn Kerns [mailto:kathryn.kerns@bceengineers.com] <br><b>Sent:</b> Thursday, August 15, 2013 2:45 PM<br><b>To:</b> Nick Caton; James Hansen; Steve Woolery; equest-users@lists.onebuilding.org<br><b>Subject:</b> RE: [Equest-users] LEED Issue with EQuest Software's Ability toModelBoilers on Ground Loops</span></div></div></div>
<div class="yiv998477155MsoNormal"> </div>
<div id="yiv998477155idOWAReplyText64261">
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;FONT-FAMILY:'Arial', 'sans-serif';">Nick if you have some way of adding a boiler to the HP Water Loop containing the Ground Loop HX without getting the "cannot combine a boiler and a ground loop HX" fatal error, please show me. I must be missing something.</span></div></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal" style="TEXT-ALIGN:center;" align="center">
<hr size="2" width="100%" align="center">
</div>
<div class="yiv998477155MsoNormal" style="MARGIN-BOTTOM:12pt;"><b><span style="FONT-SIZE:10pt;FONT-FAMILY:'Tahoma', 'sans-serif';">From:</span></b><span style="FONT-SIZE:10pt;FONT-FAMILY:'Tahoma', 'sans-serif';"> Nick Caton [<a rel="nofollow" ymailto="mailto:ncaton@smithboucher.com" target="_blank" href="mailto:ncaton@smithboucher.com">mailto:ncaton@smithboucher.com</a>]<br><b>Sent:</b> Thu 8/15/2013 10:59 AM<br><b>To:</b> James Hansen; Kathryn Kerns; Steve Woolery; <a rel="nofollow" ymailto="mailto:equest-users@lists.onebuilding.org" target="_blank" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br><b>Subject:</b> RE: [Equest-users] LEED Issue with EQuest Software's Ability toModelBoilers on Ground Loops</span></div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">If it were me, I’d just add the inconsequential boiler, state/show I did so, and move on. Typically less effort than building an impenetrable case to someone being contrarian.</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">To bullet #3: I think not for the standard output reports, but loop entering and exiting temperatures are options in the custom hourly output report dialog, which I believe you can assign to any loop type. This will put out a CSV you can use with a spreadsheet software of your choosing to quickly come up with minimums/maximums over the simulation. </span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">Attached is a past thread with a spelled out / illustrated procedure for setting up a custom hourly report, in case that’s helpful.</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">Best regards,</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">~Nick</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;"><img id="yiv998477155Picture_x0020_1" alt="cid:489575314@22072009-0ABB" width="119" height="37" border="0"></span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><b><span style="COLOR:#2d4d5e;">NICK CATON, P.E.</span></b></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:7.5pt;COLOR:#cc9900;">SENIOR ENGINEER</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#2d4d5e;">Smith & Boucher Engineers</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#2d4d5e;">25501 west valley parkway, suite 200</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#2d4d5e;">olathe, ks 66061</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#2d4d5e;">direct 913.344.0036</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#2d4d5e;">fax 913.345.0617</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#1f497d;"><a rel="nofollow" target="_blank" href="http://www.smithboucher.com/">www.smithboucher.com</a></span><u><span style="FONT-SIZE:10pt;COLOR:blue;"> </span></u></div></div>
<div class="yiv998477155MsoNormal"> </div>
<div>
<div style="BORDER-RIGHT:medium none;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;PADDING-LEFT:0in;PADDING-BOTTOM:0in;BORDER-LEFT:medium none;PADDING-TOP:3pt;BORDER-BOTTOM:medium none;">
<div class="yiv998477155MsoNormal"><b><span style="FONT-SIZE:10pt;">From:</span></b><span style="FONT-SIZE:10pt;"> <a rel="nofollow" ymailto="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank" href="mailto:equest-users-bounces@lists.onebuilding.org">equest-users-bounces@lists.onebuilding.org</a> [<a rel="nofollow" ymailto="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank" href="mailto:equest-users-bounces@lists.onebuilding.org">mailto:equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>James Hansen<br><b>Sent:</b> Thursday, August 15, 2013 11:36 AM<br><b>To:</b> Kathryn Kerns; Steve Woolery; <a rel="nofollow" ymailto="mailto:equest-users@lists.onebuilding.org" target="_blank" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br><b>Subject:</b> Re: [Equest-users] LEED Issue with EQuest Software's Ability to ModelBoilers on Ground Loops</span></div></div></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">You can absolutely add a boiler to a GSHP loop. Just add a boiler, and when asked which HW loop to assign it to, you can pick the GSHP Loop (as long as that loop is a "Water Loop HP" loop).</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">I think more than likely this is the reason you are getting the comments you are. This reviewer may know that you CAN add a boiler to a GSHP loop, which is the reason for comment #4.</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">I doubt GBCI is trying to eliminate eQuest as a modeling option.</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:11pt;COLOR:#1f497d;">Also, printing out hourly reports from an eQuest run is often helpful in proving your case (whatever case that may be). If you can show, via hourly reports, that the heat picked up by the GSHP heat exchanger exceeds the heating load for all 8,760 hours of the day, then case closed...that's all you need to submit.</span></div>
<div class="yiv998477155MsoNormal"> </div>
<div>
<div class="yiv998477155MsoNormal"><b><span style="FONT-SIZE:11pt;COLOR:teal;">GHT Limited<br></span></b><b><span style="FONT-SIZE:11pt;COLOR:#1f497d;">James Hansen, P.E., LEED AP</span></b><span style="FONT-SIZE:10pt;COLOR:#1f497d;"><br>Senior Associate<br>1010 N. Glebe Road, Suite 200<br>Arlington, VA 22201-4749<br>703-243-1200 (office)</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#1f497d;">703-338-5754 (cell)<br>703-276-1376 (fax)</span></div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:#1f497d;"><a rel="nofollow" title="http://www.ghtltd.com/" target="_blank" href="http://www.ghtltd.com/">www.ghtltd.com</a></span></div></div>
<div class="yiv998477155MsoNormal"> </div>
<div>
<div style="BORDER-RIGHT:medium none;PADDING-RIGHT:0in;BORDER-TOP:#b5c4df 1pt solid;PADDING-LEFT:0in;PADDING-BOTTOM:0in;BORDER-LEFT:medium none;PADDING-TOP:3pt;BORDER-BOTTOM:medium none;">
<div class="yiv998477155MsoNormal"><b><span style="FONT-SIZE:10pt;">From:</span></b><span style="FONT-SIZE:10pt;"> <a rel="nofollow" ymailto="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank" href="mailto:equest-users-bounces@lists.onebuilding.org">equest-users-bounces@lists.onebuilding.org</a> [<a rel="nofollow" ymailto="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank" href="mailto:equest-users-bounces@lists.onebuilding.org">mailto:equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Kathryn Kerns<br><b>Sent:</b> Thursday, August 15, 2013 12:27 PM<br><b>To:</b> Steve Woolery; <a rel="nofollow" ymailto="mailto:equest-users@lists.onebuilding.org" target="_blank" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br><b>Subject:</b> [Equest-users] LEED Issue with EQuest Software's Ability to ModelBoilers on Ground Loops</span></div></div></div>
<div class="yiv998477155MsoNormal"> </div>
<div id="yiv998477155idOWAReplyText29376">
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">Everyone, I have received a snarky comment from the LEED reviewers regarding eQuest and not being able to model back-up boilers on a ground heat pump loop. See below. The ground loop is large enough not to generate any temperature low alarm messages, the ground loop pump flow never reaches 100% flow except for 1 hour and the ground loop heating capacity is never exceeded. These facts do not appear to be a good enough explanation not modeling the back up gas boiler. </span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">My questions for the group are:</span></div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">1. Is there a way to add a boiler or some additional heat source to a ground loop in eQuest? As far as I know the only work around I have discovered is to represent the ground loop by creating a water loop and adding a magical no energy consuming boiler and fluid cooler to a heat pump water loop and change the water loop parameters to match ground loop parameters. Then you can add normal boilers that will start if the non-energy consuming ground loop boiler is too small for the building heat load. I offered this option to the LEED reviewer and they replied that it was not an established work around.</span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">2. If there is no way to attach a boiler to a ground loop in eQuest, is there some established work around that somebody has used that was accepted by a LEED reviewer?</span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">3. Is there anything in the reports that lists the maximum and minimum ground loop temperatures? I have been unable to locate it. </span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><span style="FONT-SIZE:10pt;COLOR:black;">4. Does anyone have an written explanation to answer "<i>If this </i>[the boiler] <i>is not being modeled in the energy modeling software then provide a thorough explanation for why it cannot be modeled. "?</i></span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><i><span style="FONT-SIZE:10pt;COLOR:black;">5.</span></i><span style="FONT-SIZE:10pt;COLOR:black;"> Does this sound like LEED is trying to eliminate eQuest software, and if so, is there anything we can do about it? "<i>in the future the software selected to simulate the building components must be able to model those components "</i></span></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div></div>
<div>
<div class="yiv998477155MsoNormal"><i><span style="FONT-SIZE:10pt;COLOR:black;">The project team could possibly demonstrate that the boiler would not operate through a series of engineering calculations, some other software that could possibly simulate the building’s loop temperatures, or through a thorough explanation of how the system operation prevents the boiler from operating. In short the project team must demonstrate that the boiler will not operate, not just say that is the case without presenting some evidence. If this is not being modeled in the energy modeling software then provide a thorough explanation for why it cannot be modeled. In the future the software selected to simulate the building components must be able to model those components or use an exceptional calculation (work around) to do so (G2.2). </span></i></div></div></div>
<div>
<div class="yiv998477155MsoNormal"> </div>
<div class="yiv998477155MsoNormal" style="TEXT-ALIGN:center;" align="center"><span style="COLOR:black;">
<hr size="2" width="100%" align="center">
</span></div></div></div></div></div></div></div><br>_______________________________________________<br>Equest-users mailing list<br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>To unsubscribe from this mailing list send a blank message to <a ymailto="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br><br><br></div> </div> </div> </div></body></html>