<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<meta name="Generator" content="Microsoft Word 14 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
        {font-family:"MS Mincho";
        panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
        {font-family:"MS Mincho";
        panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
        {font-family:Calibri;
        panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
        {font-family:Tahoma;
        panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
        {font-family:"\@MS Mincho";
        panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
        {font-family:Consolas;
        panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0in;
        margin-bottom:.0001pt;
        font-size:11.0pt;
        font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
        {mso-style-priority:99;
        color:blue;
        text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
        {mso-style-priority:99;
        color:purple;
        text-decoration:underline;}
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
        {mso-style-priority:99;
        mso-style-link:"Plain Text Char";
        margin:0in;
        margin-bottom:.0001pt;
        font-size:11.0pt;
        font-family:"Calibri","sans-serif";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
        {mso-style-priority:99;
        mso-style-link:"Balloon Text Char";
        margin:0in;
        margin-bottom:.0001pt;
        font-size:8.0pt;
        font-family:"Tahoma","sans-serif";}
span.PlainTextChar
        {mso-style-name:"Plain Text Char";
        mso-style-priority:99;
        mso-style-link:"Plain Text";
        font-family:"Calibri","sans-serif";}
span.BalloonTextChar
        {mso-style-name:"Balloon Text Char";
        mso-style-priority:99;
        mso-style-link:"Balloon Text";
        font-family:"Tahoma","sans-serif";}
.MsoChpDefault
        {mso-style-type:export-only;
        font-family:"Calibri","sans-serif";}
@page WordSection1
        {size:8.5in 11.0in;
        margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
        {page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang="EN-US" link="blue" vlink="purple">
<div class="WordSection1">
<p class="MsoPlainText">I sense we're choosing words carefully here...?<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">A calibration model, provided *sufficient* quantity and quality of input information regarding the rest of the building, can certainly be leveraged as a tool to inform what "correction/de-rating" factors ought to be applied to existing
 rated equipment/process efficiencies, using the actual utility bills as a guidepost. 
<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">The line where *sufficient* is drawn is of course tricky to pin down in procedure for many buildings, but my experience with calibration models has taught me there are observable patterns and trends in the annual consumption / demand
 curves that can inform & quantify the definite need for a "correction factor" for an isolated enduse.  These same observations often make it clear when there’s missing information to collect elsewhere in the model.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">In my opinion, opting to seek and define such corrections appropriately demands consideration, affirmation, and observation (where possible) of the expected causes, so as not to exceed the magnitudes of effect that may be reasonably
 expected.  Mike has provided some sound examples.  Ongoing testing and field measurements, where it fits the budget, can complement and enhance the process of model calibration quite a bit.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Speaking to where science and art blur here… I personally think some of the most fascinating corners of this industry of energy modeling services lie in the “art” of calibration and SD phase modeling.  In these venues, the rules and
 knowledge we learn and hone in controlled/accountable design and more typical prescriptive/comparative analyses come together to shape meaning, understanding, and direction out of the raw unknowns and unknowables.  Evokes Will Durant: “Every science begins
 as philosophy and ends as art.” <o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">~Nick<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">NICK CATON, P.E.<o:p></o:p></p>
<p class="MsoPlainText">SENIOR ENGINEER<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Smith & Boucher Engineers<o:p></o:p></p>
<p class="MsoPlainText">25501 west valley parkway, suite 200<o:p></o:p></p>
<p class="MsoPlainText">olathe, ks 66061<o:p></o:p></p>
<p class="MsoPlainText">direct 913.344.0036<o:p></o:p></p>
<p class="MsoPlainText">fax 913.345.0617<o:p></o:p></p>
<p class="MsoPlainText">www.smithboucher.com <o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">-----Original Message-----<br>
From: equest-users-bounces@lists.onebuilding.org [mailto:equest-users-bounces@lists.onebuilding.org] On Behalf Of RobertWichert<br>
Sent: Thursday, July 25, 2013 5:06 PM<br>
To: equest-users@lists.onebuilding.org<br>
Subject: Re: [Equest-users] existing buildings/alterations</p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">I know this has been discussed before, but with an existing building, it is "possible" to calibrate the model to the weather and setpoints and then iterate efficiencies to get them to match.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">No?<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Robert Wichert P.Eng. LEED AP BD&C<o:p></o:p></p>
<p class="MsoPlainText">+1 916 966 9060<o:p></o:p></p>
<p class="MsoPlainText">FAX +1 916 966 9068<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">===============================================<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">On 7/25/2013 2:22 PM, Busman, Michael R wrote:<o:p></o:p></p>
<p class="MsoPlainText">> Dan/Bill/Kent,<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> I guess I'm fortunate to be in the ESCO business where such esoteric questions don't come up.  When it comes to HVAC and central plant equipment to be replaced, we will determine a likely baseline cooling efficiency based on rated
 efficiency and account for age and conditions that reduce existing equipment cooling efficiency, such as dirty coils & filters, crumbling fins on air-cooled condensers, scaled condensers, short refrigerant charge, excessive approaches, or air in the condenser
 of chillers.  Although it's possible (but expensive) to field measure performance of a chiller in the field, it's virtually impossible for DX equipment.  That's where the determination of baseline cooling efficiency is as much art as science.<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> My best,<o:p></o:p></p>
<p class="MsoPlainText">> Mike Busman<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> Michael R. Busman, CEM<o:p></o:p></p>
<p class="MsoPlainText">> Lead Project Engineer II<o:p></o:p></p>
<p class="MsoPlainText">>   <o:p></o:p></p>
<p class="MsoPlainText">> Chevron Energy Solutions<o:p></o:p></p>
<p class="MsoPlainText">> A Division of Chevron U.S.A., Inc.<o:p></o:p></p>
<p class="MsoPlainText">> 145 S. State College Blvd.<o:p></o:p></p>
<p class="MsoPlainText">> Brea, CA  92821<o:p></o:p></p>
<p class="MsoPlainText">> Direct  714-671-3561<o:p></o:p></p>
<p class="MsoPlainText">> Fax     714-671-3438<o:p></o:p></p>
<p class="MsoPlainText">> eFax   866-420-0335 (Include my Full Name followed by "CAI:MHTZ" on Cover Sheet)<o:p></o:p></p>
<p class="MsoPlainText">> Mobile 310-387-2083<o:p></o:p></p>
<p class="MsoPlainText">> <a href="mailto:mbusman@chevron.com"><span style="color:windowtext;text-decoration:none">mbusman@chevron.com</span></a><o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> -----Original Message-----<o:p></o:p></p>
<p class="MsoPlainText">> From: <a href="mailto:equest-users-bounces@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users-bounces@lists.onebuilding.org</span></a>
<o:p></o:p></p>
<p class="MsoPlainText">> [<a href="mailto:equest-users-bounces@lists.onebuilding.org"><span style="color:windowtext;text-decoration:none">mailto:equest-users-bounces@lists.onebuilding.org</span></a>] On Behalf Of
<o:p></o:p></p>
<p class="MsoPlainText">> Daniel Knapp<o:p></o:p></p>
<p class="MsoPlainText">> Sent: Thursday, July 25, 2013 1:34 PM<o:p></o:p></p>
<p class="MsoPlainText">> To: Bishop, Bill<o:p></o:p></p>
<p class="MsoPlainText">> Cc: <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a>; Kent Beason<o:p></o:p></p>
<p class="MsoPlainText">> Subject: Re: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> I guess to follow up the interpretation is as such:<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> If the existing systems are left in place, the proposed and baseline are modelled identically according to the existing systems.<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> If the existing systems are *replaced*, the proposed is modelled according to the replacements, and the baseline is modelled according to the 90.1 Appendix G requirements.<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> Best,<o:p></o:p></p>
<p class="MsoPlainText">> Dan<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> -<o:p></o:p></p>
<p class="MsoPlainText">> Daniel Knapp, PhD, P Phys, LEED® AP O+M <a href="mailto:danielk@arborus.ca">
<span style="color:windowtext;text-decoration:none">danielk@arborus.ca</span></a><o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> Arborus Consulting<o:p></o:p></p>
<p class="MsoPlainText">> Energy Strategies for the Built Environment <a href="http://www.arborus.ca">
<span style="color:windowtext;text-decoration:none">www.arborus.ca</span></a><o:p></o:p></p>
<p class="MsoPlainText">> 76 Chamberlain Avenue<o:p></o:p></p>
<p class="MsoPlainText">> Ottawa, ON, K1S 1V9<o:p></o:p></p>
<p class="MsoPlainText">> Phone: (613) 234-7178 ext. 113<o:p></o:p></p>
<p class="MsoPlainText">> Fax: (613) 234-0740<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">> On 2013-07-25, at 4:24 PM, "Bishop, Bill" <<a href="mailto:bbishop@pathfinder-ea.com"><span style="color:windowtext;text-decoration:none">bbishop@pathfinder-ea.com</span></a>> wrote:<o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">>> Kent,<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> The exception to 6.1.1.2 (allowing existing systems to handle the HVAC needs of additions) provides a way to comply with Standard 90.1 without replacing existing systems. But your question is not about 90.1 compliance, it is about
 Appendix G modeling (presumably for LEED New Construction). Table G3.1 (10.) is clear on the Baseline HVAC system requirements and provides no exception for existing buildings. There may be exceptions if this is for a utility incentive program or some other
 application other than for a LEED NC model. Otherwise, I am not aware of any CIRs or other interpretations that would allow modeling existing systems in the Baseline.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> ~Bill<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: Kent Beason [<a href="mailto:kbeason@estesmcclure.com"><span style="color:windowtext;text-decoration:none">mailto:kbeason@estesmcclure.com</span></a>]<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 4:03 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: Bishop, Bill; 'Nick Caton'; <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: RE: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Bill,<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Okay...I would classify this as one of those nuances that Nick characterized earlier.  It seems strange to me that this would only apply to the envelope, but after all, it is only stipulated in Table G3.1 under Section 5f Building
 Envelope.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> To complicate the issue though, someone else's response was to use existing HVAC systems.  Normally I would dismiss his response out of hand, but he was a LEED reviewer at one time and is more 90.1 knowledgeable than me currently. 
 I was about to send this message, sure that I would model baseline per Appendix G, until I thought to look in Section 6.  Does Section 6.1.1.2 provide the adequate Exception to clarify that old HVAC systems must be modeled in the baseline for a renovation/alteration
 project?  The term "alteration" in the definitions appears to be applicable as an "addition" as shown in this Exception of 6.1.1.2.  However, the verbiage "shall not be required to comply with this standard" implies that it's optional.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Kent Beason<o:p></o:p></p>
<p class="MsoPlainText">>> -------------------------<o:p></o:p></p>
<p class="MsoPlainText">>> office - 903 581 2291<o:p></o:p></p>
<p class="MsoPlainText">>> cell - 830 609 8904<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: Bishop, Bill [<a href="mailto:bbishop@pathfinder-ea.com"><span style="color:windowtext;text-decoration:none">mailto:bbishop@pathfinder-ea.com</span></a>]<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 1:55 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: Kent Beason; 'Nick Caton'; <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: RE: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Kent,<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> I didn't notice your message was only to me. I assumed it would be a matter of seconds before others replied in the negative. The "existing conditions" caveat applies only to the envelope. You must use the Appendix G baseline systems
 and plants for the LEED Baseline, with the possible exception of the central plant for DES systems as you mention.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> ~Bill<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: Kent Beason [<a href="mailto:kbeason@estesmcclure.com"><span style="color:windowtext;text-decoration:none">mailto:kbeason@estesmcclure.com</span></a>]<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 2:49 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: 'Nick Caton'; Bishop, Bill; <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: RE: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Thanks for the feedback.    As I asked Bill offline, and I feel it goes without saying, but never hurts to be thorough :-): this applies to the old HVAC systems too, correct?  Obtaining the old HVAC system info could be a daunting
 challenge unfortunately.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> I've learned alot about nuances...  One area of this building is storefront (essentially 100%) single pane glass around the whole perimeter!<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Kent Beason<o:p></o:p></p>
<p class="MsoPlainText">>> -------------------------<o:p></o:p></p>
<p class="MsoPlainText">>> office - 903 581 2291<o:p></o:p></p>
<p class="MsoPlainText">>> cell - 830 609 8904<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: Nick Caton [<a href="mailto:ncaton@smithboucher.com"><span style="color:windowtext;text-decoration:none">mailto:ncaton@smithboucher.com</span></a>]<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 1:32 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: Bishop, Bill; Kent Beason; <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: RE: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Agreed.  Take note there are a couple nuances between what's written in 90.1 and what's required by the LEED reviewership.  I believe they draw a line in the sand where if more than 50% of a project is "retrofit" vs. NC by square
 footage, then rotations go away.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> I just had 3 LEED projects wrap up at silver/gold where in the initial submission I used thoroughly documented prescriptive baseline envelopes and 4 rotations.  The preliminary review commentary required changing the envelopes to
 remove the rotations and match reality instead.  The previous reality was (mostly) uninsulated grout filled block walls, single pane windows without film treatments, and zero wall insulation =D!<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> As a net result, each of these projects jumped way up in unanticipated modeling credits.  It was a good day.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Outside the constraints of LEED, the closer your baseline models can reflect existing realities, the better and more informative the results of your models become for a retrofit analysis.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Regards,<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> ~Nick<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> <image001.jpg><o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> NICK CATON, P.E.<o:p></o:p></p>
<p class="MsoPlainText">>> SENIOR ENGINEER<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Smith & Boucher Engineers<o:p></o:p></p>
<p class="MsoPlainText">>> 25501 west valley parkway, suite 200<o:p></o:p></p>
<p class="MsoPlainText">>> olathe, ks 66061<o:p></o:p></p>
<p class="MsoPlainText">>> direct 913.344.0036<o:p></o:p></p>
<p class="MsoPlainText">>> fax 913.345.0617<o:p></o:p></p>
<p class="MsoPlainText">>> <a href="http://www.smithboucher.com"><span style="color:windowtext;text-decoration:none">www.smithboucher.com</span></a><o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: <a href="mailto:equest-users-bounces@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users-bounces@lists.onebuilding.org</span></a> [<a href="mailto:equest-users-bounces@lists.onebuilding.org"><span style="color:windowtext;text-decoration:none">mailto:equest-users-bounces@lists.onebuilding.org</span></a>]
 On Behalf Of Bishop, Bill<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 1:17 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: Kent Beason; <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: Re: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Kent,<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Yes, for existing buildings, use the wall & roof assemblies, glazing properties etc. of the existing building for the Baseline values. Also, you don't have to simulate in four orientations.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Regards,<o:p></o:p></p>
<p class="MsoPlainText">>> Bill<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> William Bishop, PE, BEMP, BEAP, LEED AP | Pathfinder Engineers & Architects LLP<o:p></o:p></p>
<p class="MsoPlainText">>> Senior Energy Engineer<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> 134 South Fitzhugh Street                 Rochester, NY 14608<o:p></o:p></p>
<p class="MsoPlainText">>> T: (585) 325-6004 Ext. 114            F: (585) 325-6005<o:p></o:p></p>
<p class="MsoPlainText">>> <a href="mailto:bbishop@pathfinder-ea.com"><span style="color:windowtext;text-decoration:none">bbishop@pathfinder-ea.com</span></a>          
<a href="http://www.pathfinder-ea.com"><span style="color:windowtext;text-decoration:none">www.pathfinder-ea.com</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> P   Sustainability - the forest AND the trees. P<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> From: <a href="mailto:equest-users-bounces@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users-bounces@lists.onebuilding.org</span></a> [<a href="mailto:equest-users-bounces@lists.onebuilding.org"><span style="color:windowtext;text-decoration:none">mailto:equest-users-bounces@lists.onebuilding.org</span></a>]
 On Behalf Of Kent Beason<o:p></o:p></p>
<p class="MsoPlainText">>> Sent: Thursday, July 25, 2013 1:09 PM<o:p></o:p></p>
<p class="MsoPlainText">>> To: <a href="mailto:equest-users@lists.onebuilding.org">
<span style="color:windowtext;text-decoration:none">equest-users@lists.onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> Subject: [Equest-users] existing buildings/alterations<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> This question isn't eQuest specific, but deals with 90.1 interpretation.<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> For an existing building, with regards to shell alterations, G3.1.5-f says that "the baseline building shall reflect existing conditions prior to any revisions that are part of the scope of work being evaluated."  Is this statement
 as far-reaching as I believe, indicating that U-values, SHGC etc, listed in Tables 5.5 and Appendix A are ignored in a similar way as done in the proposed, since the "baseline" in this case is a real design, rather than a hypothetical baseline?<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> Kent Beason<o:p></o:p></p>
<p class="MsoPlainText">>> Estes, McClure & Associates, Inc.<o:p></o:p></p>
<p class="MsoPlainText">>> 3608 West Way<o:p></o:p></p>
<p class="MsoPlainText">>> Tyler, TX 75703<o:p></o:p></p>
<p class="MsoPlainText">>> -------------------------<o:p></o:p></p>
<p class="MsoPlainText">>> office - 903 581 2721<o:p></o:p></p>
<p class="MsoPlainText">>> cell - 830 609 8904<o:p></o:p></p>
<p class="MsoPlainText">>>   <o:p></o:p></p>
<p class="MsoPlainText">>> _______________________________________________<o:p></o:p></p>
<p class="MsoPlainText">>> Equest-users mailing list<o:p></o:p></p>
<p class="MsoPlainText">>> <a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">
<span style="color:windowtext;text-decoration:none">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">>> To unsubscribe from this mailing list send  a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG"><span style="color:windowtext;text-decoration:none">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</span></a><o:p></o:p></p>
<p class="MsoPlainText">> _______________________________________________<o:p></o:p></p>
<p class="MsoPlainText">> Equest-users mailing list<o:p></o:p></p>
<p class="MsoPlainText">> <a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">
<span style="color:windowtext;text-decoration:none">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">> To unsubscribe from this mailing list send  a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG"><span style="color:windowtext;text-decoration:none">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</span></a><o:p></o:p></p>
<p class="MsoPlainText">> _______________________________________________<o:p></o:p></p>
<p class="MsoPlainText">> Equest-users mailing list<o:p></o:p></p>
<p class="MsoPlainText">> <a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">
<span style="color:windowtext;text-decoration:none">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">> To unsubscribe from this mailing list send  a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG"><span style="color:windowtext;text-decoration:none">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</span></a><o:p></o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText">><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">_______________________________________________<o:p></o:p></p>
<p class="MsoPlainText">Equest-users mailing list<o:p></o:p></p>
<p class="MsoPlainText"><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org"><span style="color:windowtext;text-decoration:none">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</span></a><o:p></o:p></p>
<p class="MsoPlainText">To unsubscribe from this mailing list send  a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG"><span style="color:windowtext;text-decoration:none">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</span></a><o:p></o:p></p>
</div>
</body>
</html>