<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div>Dear all,</div><div> </div><div>I am working with an energy analysis in eQuest of a grocery store at Mexico City. The grocery store is a small 9,217 sq.ft. with 138 people (approx) at the same time (67 sq.ft./person). The only loads that I am using are lighting and appliances. The store is considered as a "dry store". I am not placing any big commercial refrigerator for meat. </div><div> </div><div>I have some problems with the infiltration and ventilation. The more I read about these topics and try to apply the information to the model, the more confused I get over and over again. I am not sure if I have introduced the right data to eQuest. I used 0.161 ACH for infiltration from the following source in page 32 (infiltration) in the internal loads for
the space properties:</div><div> </div><div><a href="http://www.nrel.gov/docs/fy08osti/42828.pdf">http://www.nrel.gov/docs/fy08osti/42828.pdf</a></div><div> </div><div>I am not sure if I input this in the right place. The ventilation is another issue that I do not have any clue. What should I put and where should I put it? These are the only problems, with my limited experience, that could be causing some problems. I am attaching the INP and the PD2 files plus an AutoCAD file, because I drew the floorplan and imported it to eQuest. Please, any help will be greatly appreciated.</div><div> </div><div>Kind regards,</div><div> </div><div>Jose Luis Bermudez Alcocer.</div><div> </div><div> </div></div></body></html>