<div dir="ltr">here i attached the reports for 10,15,20 degree azimuths respectively!</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, May 23, 2013 at 2:16 PM, Yf Sun <span dir="ltr"><<a href="mailto:caselysun@gmail.com" target="_blank">caselysun@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi Joe<div>I also suspected that the under cooled hours may caused by window angular property, but the loads reports you indicated show there's no big swing on the solar heat gain for 15 degree azimuth compared to 10 and 20 degrees azimuth, however i found there's a great difference in peak system cooling load in SS-J reports, the peak load for 15 azimuth is about a half of the load for 10,20 azimuth, so I guess the DOE program may uncorrectly calculated the system peak load?but when i used your weather file for simulation the unmatch hours disappeared!</div>

</div><div class="gmail_extra"><div><div class="h5"><br><br><div class="gmail_quote">On Thu, May 23, 2013 at 1:01 PM, Joe Huang <span dir="ltr"><<a href="mailto:yjhuang@whiteboxtechnologies.com" target="_blank">yjhuang@whiteboxtechnologies.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
  
    
  
  <div text="#000000" bgcolor="#FFFFFF">
    <div>孙一峰,<br>
      Ivan 是不是你的英文名字?<br>
      The only difference between the different azimuths is the solar
      radiation. <br>
      I think you should compare the summary loads report (LS-E by
      space, or LS-F for the whole building) for the different
      orientations and see how much the solar heat gains, especially
      through the windows, change.  If you really want to get into it,
      you can also print out hourly reports for the solar heat gains,
      heating and cooling loads for the ground floor zones.  You can
      also switch weather files and see what happens.  I will send you
      by e-mail a different weather file for Wuhan that I've created.<br>
      Good luck.<br>
      <br>
      Joe<br>
      <br>
      Joe Huang    黄昱<br>
      White Box Technologies, Inc.<br>
      346 Rheem Blvd., Suite 108D<br>
      Moraga CA 94556<br>
      <a href="mailto:yjhuang@whiteboxtechnologies.com" target="_blank">yjhuang@whiteboxtechnologies.com</a><br>
      <a href="http://weather.whiteboxtechnologies.com" target="_blank">http://weather.whiteboxtechnologies.com</a><br>
      <a href="http://www.whiteboxtechnologies.com" target="_blank">http://www.whiteboxtechnologies.com</a><br>
      (o) (925)388-0265<br>
      (c) (510)928-2683<br>
      "building energy simulations at your fingertips"<div><div><br>
      <br>
      <br>
      <br>
      On 5/22/2013 7:02 PM, Yf Sun wrote:<br>
    </div></div></div>
    <blockquote type="cite"><div><div>
      
      <div dir="ltr">Hi dear equesters!<br>
        <div class="gmail_quote">
          <div dir="ltr">
            <div>I was doing orientation study on my office module i can
              not figure out why i got 26% OF HOURS OUTSIDE OF
              THROTTLING RANGE in BEPU report when i set the azimuth at
              15 degrees for ground floor, the system worked in
              throttling range when azimuth at 10 or 20 degrees! the
              weather file i used is CTYW Wuhan (china). </div>
            <div><br>
            </div>
            <div>I attached the model, reports and the weather file. Any
              help will be appreciated!<span><br>
                <div><br>
                </div>
              </span></div>
          </div>
        </div>
        <div><br>
        </div>
        -- <br>
        <div dir="ltr">
          <div>Best regards<br>
          </div>
          <div>孙一峰</div>
        </div>
      </div>
      <br>
      <fieldset></fieldset>
      <br>
      </div></div><pre>_______________________________________________
Equest-users mailing list
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
    </blockquote>
    <br>
  </div>

<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div></div></div><span class="HOEnZb"><font color="#888888">-- <br><div dir="ltr"><div>Best regards<br></div><div>孙一峰</div></div>
</font></span></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><div dir="ltr"><div>Best regards<br></div><div>孙一峰</div></div>
</div>