<font size=2 face="sans-serif">Thanks Mayank.... and thanks to all eQuest
users for contributing there effort, time and knowledge for this query.</font>
<br>
<br><font size=2 face="sans-serif">Issue has been resolved ..</font>
<br>
<br><font size=2 face="sans-serif">Thanks</font>
<br><font size=2 face="sans-serif">Ankit Gupta(LEED GA, IGBC AP)</font>
<br><font size=2 face="sans-serif"> </font>
<p><font size=3> </font>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">From:      
 </font><font size=1 face="sans-serif">Mayank Bhatnagar <mayank.23aug@gmail.com></font>
<br><font size=1 color=#5f5f5f face="sans-serif">To:      
 </font><font size=1 face="sans-serif">Ankit.Anil.Gupta@jci.com</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Cc:      
 </font><font size=1 face="sans-serif">equest-users@lists.onebuilding.org</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Date:      
 </font><font size=1 face="sans-serif">05/21/2013 10:08 AM</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Subject:    
   </font><font size=1 face="sans-serif">Re: [Equest-users]
How to delete a floor in eQuest model in detail design mode.</font>
<br>
<hr noshade>
<br>
<br>
<br><font size=3>Hello Ankit,<br>
</font>
<br><font size=3>I am little bit confuse of your question; Either it will
be in detail data mode or wizard data mode (you write "</font><font size=3 face="sans-serif">detail
design wizard mode"). <br>
As my knowledge, If you are in wizard mode you can easily change the multiplier
number in the screen 1 of DD wizard: Shell component.<br>
</font>
<br><font size=3 face="sans-serif">If you are in detailed mode, when you
go at spreadsheet tab of Building shell, internal load, and air-side tab</font><font size=3>,
you will get columns for space multiplier and floor multiplier. By changing
these number you can get desire floors.  </font>
<br>
<br><font size=3 face="sans-serif">If someone has other way to do it, please
share with us.</font>
<br><font size=3><br>
</font>
<br><font size=3>Regards,<br>
</font>
<br><font size=3>Mayank Bhatnagar</font>
<br><font size=3>Energy Analyst</font>
<br>
<br><font size=3>On Mon, May 20, 2013 at 7:06 PM, <</font><a href=mailto:Ankit.Anil.Gupta@jci.com target=_blank><font size=3 color=blue><u>Ankit.Anil.Gupta@jci.com</u></font></a><font size=3>>
wrote:</font>
<br><font size=3 face="sans-serif">Hi,</font><font size=3> <br>
</font><font size=3 face="sans-serif"><br>
I have build a model for LEED compliance using a multiplier option in eQuest,
now by mistake my multiplier went wrong resulting in one excess floor in
each wing of building.</font><font size=3> <br>
</font><font size=3 face="sans-serif"><br>
So can anyone guide me to delete a floor eQuest model in detail design
wizard mode.</font><font size=3> <br>
<br>
</font><font size=3 face="sans-serif"><br>
Thanks</font><font size=3> </font><font size=3 face="sans-serif"><br>
Ankit</font><font size=3> </font>
<br><font size=3> </font>
<br><font size=3><br>
_______________________________________________<br>
Equest-users mailing list</font><font size=3 color=blue><u><br>
</u></font><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target=_blank><font size=3 color=blue><u>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</u></font></a><font size=3><br>
To unsubscribe from this mailing list send  a blank message to </font><a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG"><font size=3 color=blue><u>EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</u></font></a><font size=3><br>
</font>
<br>
<br>