Hi Everybody,
<div><br></div><div><br></div><div>I having trouble understanding how to enter outside air into the model. As far I know, there are two methods. </div><div><br></div><div>1. Set the outside air at the zonal level.</div><div>
<br></div><div>2, Set the outside air at the system level using the minimum flow ratio and a schedule.</div><div><br></div><div><br></div><div>When I use method 1, I have high unmet load hours for heating for outside air of 150 cfm per a zone.</div>
<div><br></div><div>When I use method 2, I have no unmet load hours but I feel that I am missing something because the ERV I am using does not save any energy but the program says I am using 150 cfm per a zone. Is there a specific schedule you are supposed to create when making minimum flow?</div>
<div><br></div><div>Thanks in advance,</div><div><br></div><div>Lee</div>