<div dir="ltr"><p class="MsoNormal">Hello all,</p>

<p class="MsoNormal"><span class="gi">The project that I’m working at has Exhaust fans
for service areas and kitchens. I entered EFs data within the Wizard Screen 14 (Zone
Group Definitions, Zone Group Details). For the baseline model which s in
Auto-sixe Flow condition for Supply Fans there is no problem and eQUEST
simulate the project. But for Design model that I entered the Fan Flow and OSA
from drawings, the simulation terminates due to the following error:</span></p><p class="MsoNormal"><span class="gi"><br></span></p><p class="MsoNormal"><span class="gi"><img src="cid:ii_13d3871cf3a3a514" alt="Inline image 1"><br>
</span></p><p class="MsoNormal"><span class="gi"><br></span></p><p class="MsoNormal"><span class="gi"></span></p><p class="MsoNormal"><span class="gi">Although I increased the assigned the same
air flow or larger volume than the exhaust flow (in DDE mode), the error remains
the same.</span></p>

<p class="MsoNormal"><span class="gi"> </span></p>

<p class="MsoNormal"><span class="gi">Your help would be greatly appreciated.</span></p><p class="MsoNormal"><span class="gi"><br></span></p><p class="MsoNormal"><span class="gi"><br></span></p>

<p class="MsoNormal">Morteza</p><p></p><div><br></div>-- <br><div dir="ltr"><i><span style="color:rgb(0,102,0)">Morteza Kasmaei</span></i><br style="color:rgb(0,102,0)"><span style="color:rgb(0,102,0)">Architect, LEED® AP BD+C<br>
</span></div>
</div>