<html>
<body>
<font size=3>Bill<br>
Excellent limerick but not the way I know it ;-)<br><br>
At 09:17 AM 25/02/2013, Bishop, Bill wrote:<br>
<blockquote type=cite class=cite cite="">Thanks Chris. Not sure why I
couldn’t find that in the DOE-2 help menu.<br>
<br>
Did you ever see Sally MacWhorter?<br>
New ensign – red shirt and tricorder.<br>
She survived an attack<br>
But when she beamed back…<br>
A freak accident in the transporter.<br>
<br>
~Bill<br>
<br>
<b>From:</b> Chris Jones
[<a href="mailto:cj@enersave.ca" eudora="autourl">
mailto:cj@enersave.ca</a>] <br>
<b>Sent:</b> Friday, February 22, 2013 8:22 PM<br>
<b>To:</b> Bishop, Bill<br>
<b>Cc:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] AIR/TEMP-CONTROL keyword<br>
<b>Importance:</b> High<br>
<br>
<b>Staged Capacity DX Cooling and Heating<br>
</b>This modeling capability is only available for P\T\7T systems.
Functionally, die staged-volume system is quite similar<br>
to the packaged variable-volume, variable-temperature system, and shares
its code word.<br>
AIR/TEMP-CONTROL<br>
For the PWT systems only, accepts a code-word specifying die type of
airflow and temperature control employed:<br>
VARIABLE-YOL/TE^IP the default, specifies the common
PWT temperature control strategy.<br>
STAGED-VOLUME specifies die staged-volume strategy described
herein.<br><br>
Did you ever see Sally MacWhorter?<br><br>
Now Bill you finish this limeric!<br><br>
At 06:24 PM 22/02/2013, you wrote:<br><br>
Content-Language: en-US<br>
Content-Type: multipart/related;<br>
boundary="_004_90D829482BDEDB4CB264DE5060592B1910431724lightningpathfi_";<br>
type="multipart/alternative"<br><br>
What is being referred to by the System ?AIR/TEMP-CONTROL? keyword in the
DOE2 help menu, below? Is this the SYSTEM: COOL-CONTROL and
SYSTEM:HEAT-CONTROL?<br>
First correct answer wins a limerick on the topic of your choice.<br>
<br>
Thanks,<br>
Bill<br>
<br>
<b>COMPRESSOR-TYPE<br>
</b>Takes a code-word that specifies the compressor speed control
mechanism; this keyword is intended for use in modeling a packaged direct
expansion heat pump or air-conditioning that incorporated variable speed
compressor control: It is suggested that the
SYSTEM:AIR/TEMP-CONTROL keyword be used for systems which incorporate
multiple steps or stages of capacity rather than this keyword/codeword
combination.<br>
SINGLE-SPEED
specifies that the compressor operates at a constant speed, and modulates
its capacity by cycling on/off. This is the default for most system
types.<br>
DUAL-SPEED
specifies that the compressor has two stages of capacity. This is
appropriate for the residential system (for RESYS, RESYS2 only). It
is suggested that the SYSTEM:AIR/TEMP-CONTROL be used for staged capacity
systems rather than this keyword/codeword combination.<br>
VARIABLE-SPEED specifies
that the compressor can vary its speed to exactly match the capacity
required. This is applicable to RESVVT, PSZ, PVAVS and PVVT systems.<br>
<br>
<a href="mailto:wbishop@pathfinder-ea.com">
<img src="cid:7.1.0.9.2.20130225114109.04f63600@enersave.ca.1" width=480 height=114 alt="Senior Energy Engineer 28Jun2012">
</a><br><br>
<br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
<br>
To unsubscribe from this mailing list send a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">
EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br><br>
>><br>
Christopher Jones, P.Eng.<br>
Suite 1801, 1 Yonge Street<br>
Toronto, ON M5E1W7<br>
Tel. 416-203-7465<br>
Fax. 416-946-1005<br>
email <a href="mailto:cj@enersave.ca">cj@enersave.ca</a><br><br>
</blockquote>
<x-sigsep><p></x-sigsep>
>><br>
Christopher Jones, P.Eng.<br>
Suite 1801, 1 Yonge Street<br>
Toronto, ON M5E1W7<br>
Tel. 416-203-7465<br>
Fax. 416-946-1005<br>
email cj@enersave.ca<br>
</font></body>
</html>