<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
Hi all,<br><br>Thank you thus far for helping me learn eQuest, I have some very basic questions which are 30 second answer type questions much is appreciated thank you!!!<br><br><br>---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------<br>Question 1: For hourly loads when I choose:<br><br>a)Does the following give me the total electricity consumption by the AC for cooling in kWh? how would i get the associated power consumption by the fan/system? or does this includes it as well?<br>electric meter ---> cooling end-use energy <br><br>b) same as a but for Electric Furnace.... This I assume is the electric consumption for heating... how would i get the power consumption used by fans etc for the electric furnace? or does this includes it as well?<br>electric meter --> heating end-use energy<br><br>c) Does the following give me total Gas consumption by the furnace only? how would i get the fan power consumption associated with the furnace?<br>electric meter ---> heating end-use energy<br><br>d) For the Natural Gas Furnace, does the Btu/hr = input or output? ( I assume input since it is consumption)<br><br><br><br><br>---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------<br>Question 2: are the hourly readings for the output i.e. hour 1,2....20....24 beginning of the hour or After the hour... becuase scheduling works : 1-2. 2-3.... etc but the output in excel is hourly...<br><br><br>---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------<br>Question 3:<br>in SD wizard I can easily enter SEER or AFUE for the systems... I can't find that anywhere in DDedit... I dont want to go back to SD becuase all my changes will be erased!<br><br><br><br><br>Thank you very much !!! I may have a few beginner questions as I run into them But much is appreciated!<br><br>regards,<br>Jay<br><br><br><br><br><br><br> </div></body>
</html>