<html>
<body>
<font size=3>If the simulation runs fine and the Compliance runs
that generate the error, then it is likely a Compliance engine error.
<br><br>
<br>
At 05:38 PM 21/01/2013, Ed McAvoy wrote:<br>
</font><blockquote type=cite class=cite cite=""><font face="arial" size=3>
Hi everyone,<br><br>
While attempt to run a Equest baseline report for LEED the following
error stops the program.<br><br>
<i>Error - DeletComp () causing deletion of component whose assignment to
another component is required evaluating rule:
Delete circ loops except DHW<br>
</i><br>
Here is a screen shot:<br><br>
</font><br><br>
<img src="cid:7.1.0.9.2.20130123184403.04f32610@enersave.ca.1" width=576 height=443 alt="[]">
<font face="arial" size=3><br>
There is no option to navigate to the error.<br><br>
Has anyone had this problem and been able to correct it?<br><br>
Thanks in advance.</font><br><br>
<font face="arial" size=4><b>Edward McAvoy, P.E., LEED
AP</b></font><font face="arial" size=3><br>
<b>Project Director</b><br>
</font><font face="arial" size=3 color="#0000FF"><i><u>
<a href="mailto:emcavoy@ceicinc.com">emcavoy@ceicinc.com</a></u></i><br>
</font><font face="times" size=6 color="#33CCFF"><b>CE&IC</b></font>
<font face="times" size=3 color="#33CCFF"><br>
</font><font face="arial" size=3>2 Terri Lane <br>
Suite 125 <br>
Burlington, NJ 08016<br>
Phone: 609-387-1700 / Fax: 609-387-9322<br><br>
</font><br><br>
<br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" eudora="autourl">
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
<br>
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</blockquote>
<x-sigsep><p></x-sigsep>
>><br>
Christopher Jones, P.Eng.<br>
Suite 1801, 1 Yonge Street<br>
Toronto, ON M5E1W7<br>
Tel. 416-203-7465<br>
Fax. 416-946-1005<br>
email cj@enersave.ca<br>
</body>
</html>