Dear users,<div>I am modelling a VRF system  (gas heat pump, heat recovery etc), I have already read the suggested presentation from Energy Trust of Oregon regarding VRF system modelling. At the end of the presentation is described a procedure in order to calculate the heat recovery (Create an hourly report for each zone with two series Elec input to heat (kW) and Elec input to cool (kW), when there is both heating and cooling for a particular hour the smaller value of the two is the energy recovered by the Refrigerant Branch Selector Box). Is this the only way to calculate the recovered energy, does not the software take it into account during the simulations? Must this amount be subtracted from the total energy consumption?</div>
<div>Thank you for your help.</div><div><br></div><div>Regards,</div><div>Eva</div>