Hi All,<br><br><br>I recently did a model where I had the same system in both base and proposed but I changed the R-Value from 4 (base) to 20 (proposed). I also changed the window U-value from .80 (base) to .35 (proposed). After I did the run, I saw only a 5% savings between the heating and cooling use in the model. When I looked at the loads I saw the base had twice as much cooling and heating load than the proposed. Does any know why the energy savings would only be 5% when you have a huge difference between the cooling and heating loads?<br>
<br>Thanks,<br><br>Lee<br>