<p>well chris, this is a thing that we all were felt. but i think there are others applications to do or make weird shapes better. i do my models with IES-VE, and revit and sketchup plugins work quite good for those annoyances shapes, with bridges, corridors, 2storey halls, etc. but i'm sure of, perhaps, in new equest releases this issue would be complemmented with similar plugins; it should be!</p>

<p>regards chris!</p>
<div class="gmail_quote">On Aug 4, 2012 12:23 PM, "Chris Jones" <<a href="mailto:cj@enersave.ca">cj@enersave.ca</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

<div>
I do am self taught in equest but I had years of DOE2.1e
experience.  The only course I would find helpful is the very
beginning of the model - reading the CAD floor plans into equest. 
<br><br>
I have never been able to bring in successive floors that have a
different floor plate - changing size - smaller or larger (floor
overhangs).  The situation I have absolutely no idea about is a
building with a multi-storey, central atrium with "bridges"
between the two sides of the atrium - corridors between each side. 
<br><br>
I have never been able to find a course that specializes in weird
geometry situations.  <br><br>
I just give up and go back to DOE2.1e where I can define the model
without all that annoying 3-D x,y,z to have to contend with.  It
makes nice pictures in the end but doesn't to a whole lot for
productivity - at least in my case. <br><br>
<br><br>
At 06:50 PM 02/08/2012, Cristian Salvador Jara Toro wrote:<br>
<blockquote type="cite">Dear community,<br><br>
 i´m interested in <br>
<a href="http://energy-models.com/training/equest-leed-case-study" target="_blank">
http://energy-models.com/training/equest-leed-case-study</a> training,
but i´m not sure if it worth.<br><br>
I do not have experience on equest modelling but I do so on IES-VE
modelling, so, if <br>
I have that experience, it would be necessary to do a training, or
perhaps It would worth to take my own risk?<br><br>
any comments?<br><br>
best.<br>
<b><br><br>
Cristian Jara Toro</b><br>
Ingeniero Acústico<br><br>
Cel: 6 207 8566<br><br>
<br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
<br>
To unsubscribe from this mailing list send  a blank message to
<a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a></blockquote>
<u></u><p><u></u>
>><br>
Christopher Jones, P.Eng.<br>
Suite 1801, 1 Yonge Street<br>
Toronto, ON M5E1W7<br>
Tel. 416-203-7465<br>
Fax. 416-946-1005<br>
email <a href="mailto:cj@enersave.ca" target="_blank">cj@enersave.ca</a><br>
</p></div>

</blockquote></div>