<div>Hello everyone.  I am trying to model a ozone unit that preheats air from another unit, up to 150F using a steam coil, then tempering/mixing with return air, then cools down to 55F, and lastly reheated by zone reheat coils.  The problem is that Equest sets up the mixing of outdoor air and return air before the preheat coils, which would over estimate the amount of heating that actually happens.  Also I am unable to set my discharge off the preheat steam coil above 70F.  Does any one have any clever work arounds for this problem? </div>
<div><br></div><div>Thanks in advance.</div><div>Justin Chin</div>