<html>
<body>
LS-B gives you the peak space load, excluding OA. <br>
LS-E gives you the space monthly loads, excluding OA.<br><br>
Interior spaces, without exterior walls, roof, floor, will only have
internal loads - occupants, lights, equipment. <br><br>
<br><br>
At 05:02 PM 17/07/2012, Sami, Vikram wrote:<br>
<blockquote type=cite class=cite cite="">Content-Language: en-US<br>
Content-Type: multipart/alternative;<br>
<x-tab> </x-tab>
boundary="_000_BF1FB99E0691894F9DCB992DF4DFDE9FDCC2DA73chi01exmbperkin_"<br>
<br>
Are these internal zones? If so – it might not be out of the question
that there is no heat loss. Are you looking at the appropriate LS report?
<br>
<br>
<br>
<br>
<b> <br>
Vikram Sami</b>, LEED AP BD+C<br>
Sustainable Design Analyst<br>
1315 Peachtree St. NE, Atlanta, GA 30309<br>
t: 404-443-7462 f:
404.892.5823 e:
vikram.sami@perkinswill.com
<a href="http://www.perkinswill.com/">www.perkinswill.com</a><br>
<b>Perkins+Will.</b> Ideas + buildings that honor the broader goals
of society<br>
<br>
<br>
<b>From:</b> equest-users-bounces@lists.onebuilding.org
[<a href="mailto:equest-users-bounces@lists.onebuilding.org" eudora="autourl">
mailto:equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of
</b>Steven Savich<br>
<b>Sent:</b> Tuesday, July 17, 2012 2:09 PM<br>
<b>To:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] eQuest: No Heat Loss in some
zones<br>
<br>
Mr Singh,<br>
<br>
For help on diagnosing model problems, you'll need to post your .inp
& .pd2 files for the rest of us to be able to see what's going
on.<br>
<br>
Steven<br>
<br>
<b>From:</b> equest-users-bounces@lists.onebuilding.org
[<a href="mailto:equest-users-bounces@lists.onebuilding.org" eudora="autourl">
mailto:equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of
</b>Satwinder Singh<br>
<b>Sent:</b> Tuesday, July 17, 2012 11:05 AM<br>
<b>To:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> [Equest-users] eQuest: No Heat Loss in some zones<br>
<br>
Hi there,<br>
<br>
We have 2 buildings in the model. Building A – which is more complex with
gym, kitchen, lounge, offices, classrooms et al seems to be fine. However
Building B, a simpler 3-storey elongated residential building (added
later) seems faulty. We are not getting any BDL errors, but the
simulation file shows that it shows ZERO heat loss for some of its
zones... This is perplexing to us as we have done, redone it a million
times. Tried everything we could think of, but the problem persists. We
would love to see what wrong we are doing. Any input and/or help will be
much appreciated.<br>
<br>
Regards,<br>
<br>
<b>Sat Singh<br>
</b>Mechanical Engineer<br>
<b>Flow Consulting Group Inc.<br>
</b> <br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" eudora="autourl">
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
<br>
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</blockquote>
<x-sigsep><p></x-sigsep>
<br>
Chris Jones, P.Eng.<br>
14 Oneida Avenue<br>
Toronto, ON M5J2E3<br>
Tel. 416 203-7465<br>
Fax. 416 946-1005</body>
</html>